first commit

ATMEGA_SERIAL/ATMEGA_SERIAL.ino

@@ -0,0 +1,151 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+*/
+#include <Wire.h>
+#include <Adafruit_BMP085.h>
+
+#define LED_PIN (13)
+
+// 
+float temperature = 0.0;
+float pressure    = 0.0;
+float pression    = 0.0;
+float presiune = 0.0;
+int sensorValue   = 0;   
+int sensorValue2  = 0;
+int sensorValue3  = 0; 
+int distance = 0;
+
+//const int TrigPin = 2;
+//const int EchoPin = 3;
+
+// ################# Barometre ####
+Adafruit_BMP085 bmp;
+// #####################
+
+
+// =============================================================
+/******************************************************************/
+ void reSetup() {
+//  pinMode(TrigPin, OUTPUT);
+//  pinMode(EchoPin, INPUT);
+  Serial.begin(115200);
+  
+  // Sleep 
+  /* Don't forget to configure the pin! */
+  pinMode(LED_PIN, OUTPUT);
+ }
+void setup() {
+  
+   reSetup();
+
+  /*** Configure the timer.***/
+  
+}
+ 
+void loop()
+{
+  digitalWrite(LED_PIN, HIGH);
+  barometre();
+  
+  readSensors();
+
+  //readPresence();
+  
+  sendAll();  
+  digitalWrite(LED_PIN, LOW); 
+  delay(2000);
+  
+}
+void sendAll() {
+     
+    sendValues("TEMPERATURE", temperature * 100);
+    
+    sendValues("PRESSION", (int) (pression * 10));
+    
+    sendValues("PRESSURE", (int) (pressure * 10));
+
+    sendValues("SENSOR_1", sensorValue);
+    
+    sendValues("SENSOR_2", sensorValue2);
+    
+    sendValues("SENSOR_3", (int) (sensorValue3 / 10.24));
+
+    //sendValues("DISTANCE", distance);
+
+}
+
+void barometre() {
+  /* See Example: TypeA_WithDIPSwitches */
+//  mySwitch.switchOn("00001", "10000");
+//  delay(1000);
+    // BMP
+   if (bmp.begin()) {
+     
+  temperature = bmp.readTemperature();  
+  pressure= bmp.readPressure() / 100.0;
+  pression = pressure / 101.325;
+  pression = pression * 0.760 * 100;
+    // http://en.wikipedia.org/wiki/Atmospheric_pressure#Mean_sea_level_pressure
+  //  Serial.print("Presiure la nivelul marii (calculata) = ");
+  presiune = bmp.readSealevelPressure() / 101.325;
+  presiune = presiune * 0.760;
+   }
+}  
+
+
+//void readPresence() {
+//  digitalWrite(TrigPin, LOW); //Low high and low level take a short time to TrigPin pulse
+//  delayMicroseconds(2);
+//  digitalWrite(TrigPin, HIGH);
+//  delayMicroseconds(10);
+//  digitalWrite(TrigPin, LOW);
+//  
+//  float cm = pulseIn(EchoPin, HIGH) / 58.0; //Echo time conversion into cm
+//  cm = (int(cm * 100.0)) / 100.0; //Keep two decimal places
+//  
+//  distance = cm * 100;
+//
+//}
+
+void readSensors() {
+  // ##########################################"
+  // Analogic read
+  // ------------------------------------------
+  sensorValue = analogRead(A0);  
+  sensorValue2 = analogRead(A1);
+  sensorValue3 = analogRead(A2);  
+ // int sensorValue4 =  digitalRead(10);   
+  
+  //vol = (float)sensorValue / 1024 * 5.0;
+
+  // ##########################################
+
+
+}
+
+void sendValues(String id, int value) {
+  
+  
+  Serial.print(id);
+  Serial.print("=");
+  Serial.println(value);
+  //  mySwitch.switchOn(buf,buf2);
+//  mySwitch.switchOn(id, value);
+//  delay(1000);
+}
+
+
+