first commit

Blink/Blink.ino

@@ -0,0 +1,103 @@
+/*
+  Blink
+  Turns on an LED on for one second, then off for one second, repeatedly.
+
+  Most Arduinos have an on-board LED you can control. On the Uno and
+  Leonardo, it is attached to digital pin 11. If you're unsure what
+  pin the on-board LED is connected to on your Arduino model, check
+  the documentation at http://arduino.cc
+
+  This example code is in the public domain.
+
+  modified 8 May 2014
+  by Scott Fitzgerald
+ */
+ #include <RCSwitch.h>
+ 
+ boolean started = false;
+ int id = 0;
+
+RCSwitch mySwitch = RCSwitch();
+
+
+// Cas
+// 12 = Courant général 0 éteint 1 allumé
+// 11 = Mode radiateur 0 hors gel 1 confort
+
+
+
+// the setup function runs once when you press reset or power the board
+void setup() {
+  // initialize digital pin 11 as an output.
+  pinMode(11, OUTPUT);
+  pinMode(12, OUTPUT);
+  digitalWrite(11, HIGH); 
+  digitalWrite(12, HIGH); 
+  Serial.begin(9600);
+  mySwitch.enableReceive(0);  // Receiver on inerrupt 0 => that is pin #2
+}
+
+void loop() {
+  if (mySwitch.available()) {
+  
+    int value = mySwitch.getReceivedValue();
+    
+    if (value == 0) {
+      Serial.print("Unknown encoding");
+    } else {
+      long data = mySwitch.getReceivedValue();
+      //Serial.print("Received ");
+      //Serial.print( data );
+//      Serial.print(" / ");
+//      Serial.print( mySwitch.getReceivedBitlength() );
+//      Serial.print("bit ");
+//      Serial.print("Protocol: ");
+//      Serial.println( mySwitch.getReceivedProtocol() );
+     //Serial.println("");
+        //delay(1000);              // wait for a second
+        
+        if (data == 111269) {
+          started = true;
+         // id = 0;
+          //Serial.println("started");
+        } else if (data == 962111) {
+          started = false;
+          id = 0;
+          //Serial.println("Arret");
+        } else if (data == 1969 || data == 2069 || data == 2169 || data == 2269) {
+          //Serial.print("id=");
+          //Serial.println(data);
+          // if (id == 0) {
+          id = data;
+//          } else {
+//            started = false;
+//            id = 0;
+//          }
+        } else {
+          
+          if (started && id == 1969) {
+            Serial.print("Demarré ");
+            Serial.print("id=");
+            Serial.print(id);
+            Serial.print(" data=");
+            Serial.println(data);
+          //       
+            if (data >= 1800) {
+              digitalWrite(11, HIGH); 
+              digitalWrite(12, HIGH); 
+              Serial.println("HIGH");
+            //  delay(2000);
+            } else if (data > 1200) {
+              digitalWrite(11, LOW); 
+              digitalWrite(12, LOW);    
+              Serial.println("LOW");
+              //delay(2000);     
+            }
+          }
+        }
+    }
+
+    mySwitch.resetAvailable();
+  }
+}
+