first commit

CC1101_Emetteur/CC1101_Emetteur.ino

@@ -0,0 +1,92 @@
+#include "EEPROM.h"
+#include "cc1101.h"
+
+//Arduino   GND            <->       CC1101 GND
+//Arduino   VCC (+5v ou 3,3 ?<->       CC1101 VCC
+//Arduino   10               <->       CC1101 CSN (SS)
+//Arduino   11               <->       CC1101 SI (MOSI)
+//Arduino   12               <->       CC1101 SO (MISO)
+//Arduino   13               <->       CC1101 SCK
+//Arduino   02               <->       CC1101 GD0 
+
+CC1101 cc1101;
+
+// The LED is wired to the Arduino Output 4 (physical panStamp pin 19)
+#define LEDOUTPUT 7
+
+// counter to get increment in each loop
+byte counter;
+byte b;
+//byte syncWord = 199;
+byte syncWord[2] = {199, 0};
+
+void blinker(){
+digitalWrite(LEDOUTPUT, HIGH);
+delay(100);
+digitalWrite(LEDOUTPUT, LOW);
+delay(100);
+}
+
+void setup()
+{
+Serial.begin(9600);
+Serial.println("start");
+
+// setup the blinker output
+pinMode(LEDOUTPUT, OUTPUT);
+digitalWrite(LEDOUTPUT, LOW);
+
+// blink once to signal the setup
+blinker();
+
+// reset the counter
+counter=0;
+Serial.println("initializing...");
+// initialize the RF Chip
+cc1101.init();
+
+//cc1101.setSyncWord(&syncWord, false);
+cc1101.setSyncWord(syncWord, false);
+cc1101.setCarrierFreq(CFREQ_433);
+cc1101.disableAddressCheck();
+//cc1101.setTxPowerAmp(PA_LowPower);
+
+delay(1000);
+
+Serial.print("CC1101_PARTNUM "); //cc1101=0
+Serial.println(cc1101.readReg(CC1101_PARTNUM, CC1101_STATUS_REGISTER));
+Serial.print("CC1101_VERSION "); //cc1101=4
+Serial.println(cc1101.readReg(CC1101_VERSION, CC1101_STATUS_REGISTER));
+Serial.print("CC1101_MARCSTATE ");
+Serial.println(cc1101.readReg(CC1101_MARCSTATE, CC1101_STATUS_REGISTER) & 0x1f);
+
+Serial.println("device initialized");
+//Serial.println("done");
+}
+
+void send_data() {
+CCPACKET data;
+data.length=10;
+byte blinkCount=counter++;
+data.data[0]=5;
+data.data[1]=blinkCount;data.data[2]=0;
+data.data[3]=1;data.data[4]=0;
+//cc1101.flushTxFifo ();
+Serial.print("CC1101_MARCSTATE ");
+Serial.println(cc1101.readReg(CC1101_MARCSTATE, CC1101_STATUS_REGISTER) & 0x1f);
+if(cc1101.sendData(data)){
+Serial.print(blinkCount,HEX);
+Serial.println(" sent ok :)");
+blinker();
+}else{
+Serial.println("sent failed :(");
+blinker();
+blinker();
+}
+}
+
+void loop()
+{
+send_data();
+delay(4000);
+}