first commit

2025-03-06 11:15:32 +01:00
commit 7b30d6e298
5276 changed files with 2108927 additions and 0 deletions
--- a/ESP8266_DOMOTICZ_OCTOPRINT_WEB_VOLETS/Somfy.h
+++ b/ESP8266_DOMOTICZ_OCTOPRINT_WEB_VOLETS/Somfy.h
@@ -0,0 +1,104 @@
+// -------------------------------------------------------------
+//
+// Fichier principal de votre Box compatible Somfy RTS ou Chacon Dio
+// Version 1.1.0
+// Mise à jour par TOST Corp. le 02 janvier 2020
+// www.tostcorp.com/boxsomfyrts
+//
+// -------------------------------------------------------------
+
+
+#ifndef Somfy_h
+#define Somfy_h
+
+// Librairies utilisées
+#include <Arduino.h>
+// #include "sql_database_helper.h"
+#include <EEPROM.h>
+#include <ESP8266WiFi.h>
+#include "PubSubClient.h"
+#include "Ticker_v2.h"
+// #include "config.h"
+
+struct REMOTE {
+    unsigned int id;
+    char const* mqtt_topic;
+    unsigned int default_rolling_code;
+    uint32_t eeprom_address;
+    char const* description;
+    char const* device_group;
+};
+
+struct DIO_REMOTE {
+    unsigned int id;
+    char const* mqtt_topic;
+    unsigned long sender;
+    unsigned long interruptor;
+    char const* description;
+    char const* device_group;
+};
+
+
+/* Adapted to run on ESP32 from original code at https://github.com/Nickduino/Somfy_Remote
+This program allows you to emulate a Somfy RTS or Simu HZ remote.
+If you want to learn more about the Somfy RTS protocol, check out https://pushstack.wordpress.com/somfy-rts-protocol/
+The rolling code will be stored in non-volatile storage (Preferences), so that you can power the Arduino off.
+Serial communication of the original code is replaced by MQTT over WiFi.
+Modifications should only be needed in config.h.
+*/
+
+#define SIG_HIGH GPIO_REG_WRITE(GPIO_OUT_W1TS_ADDRESS, 1 << PORT_TX)
+#define SIG_LOW  GPIO_REG_WRITE(GPIO_OUT_W1TC_ADDRESS, 1 << PORT_TX)
+
+
+
+// void blink_function();
+// Ticker mqtt_error_timer(blink_function, 10, 11);
+// Ticker blink_timer(blink_function, 200, 21);
+// Ticker publish_timer(blink_function, 10, 11);
+
+// WiFiClient wifiClient;
+
+// Buttons
+#define SYMBOL 640
+#define HAUT 0x2
+#define STOP 0x1
+#define BAS 0x4
+#define PROG 0x8
+
+
+class Somfy {
+  public:
+    Somfy();
+    void init();
+    void loop();
+    //void blink_function();
+  
+    void BuildFrame(byte *frame, byte button, REMOTE remote);
+    void receivedCallback(char* topic, byte* payload, unsigned int length);
+    void mqttconnect();
+    void send_somfy_command(char command, REMOTE currentRemote, bool group);
+    void send_dio_command(char command, DIO_REMOTE dio_currentRemote, bool group);
+    void SendCommand(byte *frame, byte sync);
+    void blink_blue_light(int time_ms, int delay_ms);
+    void sendBit(bool b);
+    void sendPair(bool b);
+    void transmit(unsigned long sender, int interruptor, int blnOn);
+    int add_to_database(String device_id,const char* mqtt_topic, const char* description, const char* type, const char* device_group);
+    int clean_database(String device_id);
+    String urlencode(String str);
+    unsigned char h2int(char c);
+    void loopSerial();
+    void _receivedCallback(char* topic, byte* payload, unsigned int length);
+
+    public:
+        const char* HOST = "bipbipavertisseur.alwaysdata.net";
+        byte frame[7];
+        PubSubClient mqtt;
+        WiFiClient wifiClient;
+
+};
+
+#endif
+
+