first commit

2025-03-06 11:15:32 +01:00
commit 7b30d6e298
5276 changed files with 2108927 additions and 0 deletions
--- a/ESP8266_RELAI/ESP8266_RELAI.ino
+++ b/ESP8266_RELAI/ESP8266_RELAI.ino
@@ -0,0 +1,139 @@
+/*
+  Blink
+
+  Turns an LED on for one second, then off for one second, repeatedly.
+
+  Most Arduinos have an on-board LED you can control. On the UNO, MEGA and ZERO
+  it is attached to digital pin 13, on MKR1000 on pin 6. LED_BUILTIN is set to
+  the correct LED pin independent of which board is used.
+  If you want to know what pin the on-board LED is connected to on your Arduino
+  model, check the Technical Specs of your board at:
+  https://www.arduino.cc/en/Main/Products
+
+  modified 8 May 2014
+  by Scott Fitzgerald
+  modified 2 Sep 2016
+  by Arturo Guadalupi
+  modified 8 Sep 2016
+  by Colby Newman
+
+  This example code is in the public domain.
+
+  http://www.arduino.cc/en/Tutorial/Blink
+*/
+
+// Load the virtuabotixRTC library
+#include "virtuabotixRTC.h"           
+
+// Determine the pins connected to the module
+// myRTC (clock, data, RST)
+virtuabotixRTC myRTC (6, 7, 8);
+
+// the setup function runs once when you press reset or power the board
+void setup() {
+  // initialize digital pin LED_BUILTIN as an output.
+  Serial.begin(9600);
+  pinMode(2, OUTPUT);
+  pinMode(3, OUTPUT);
+  stop();
+  // After to set the entire information, comment the following line
+  // (seconds, minutes, hours, day of week, day of month, month, year)
+  // myRTC.setDS1302Time (0, 18, 23, 6, 31, 7, 2021);
+}
+
+// the loop function runs over and over again forever
+void loop() {
+
+   // Reads the information from the CI
+  myRTC.updateTime ();
+  printTime();
+  avance();
+  delay(10000);                       // wait for a second
+  Serial.println("off");
+  recule();
+  delay(10000);                       // wait for a second
+  Serial.println("On");
+
+  stop();
+  delay(10000);
+}
+
+void printTime()
+{
+    // Print the details in serial monitor
+  Serial.print
+  ("Data "); // Call the routine that prints the day of the week
+  imprime_dia_da_semana (myRTC.dayofweek);
+  Serial.print (", ");
+  Serial.print (myRTC.dayofmonth);
+  Serial.print ("/");
+  Serial.print (myRTC.month);
+  Serial.print ("/");
+  Serial.print (myRTC.year);
+  Serial.print ("");
+  Serial.print
+  (" Time "); // Adds a 0 if the time value is <10
+  if (myRTC.hours <10)
+  {
+    Serial.print ("0");
+  }
+  Serial.print (myRTC.hours);
+  Serial.print
+  (":"); // Adds a 0 if the value of the minutes is <10
+  if (myRTC.minutes <10)
+  {
+    Serial.print ("0");
+  }
+  Serial.print (myRTC.minutes);
+  Serial.print
+  (":"); // Adds a 0 if the value of the latter is <10
+  if (myRTC.seconds <10)
+  {
+    Serial.print ("0");
+  }
+  Serial.println (myRTC.seconds);
+
+}
+void stop()
+{
+    digitalWrite(2, LOW);   // turn the LED on (HIGH is the voltage level)
+  digitalWrite(3, LOW);
+}
+
+void avance() {
+  digitalWrite(2, HIGH);   // turn the LED on (HIGH is the voltage level)
+  digitalWrite(3, LOW);  
+}
+
+void recule() {
+  digitalWrite(3, HIGH);   // turn the LED on (HIGH is the voltage level)
+  digitalWrite(2, LOW);  
+}
+
+void imprime_dia_da_semana (int day)
+{
+  switch (day)
+  {
+    case  1:
+    Serial.print
+    ("Sunday");
+    break; case  2:
+    Serial.print
+    ("Second");
+    break; case  3:
+    Serial.print
+    ("Terca");
+    break; case  4:
+    Serial.print
+    ("Wednesday");
+    break; case  5:
+    Serial.print
+    ("Quinta");
+    break; case  6:
+    Serial.print
+    ("Friday");
+    break; case  7:
+    Serial.print
+    ("Saturday"); break;
+  }
+}