first commit

RCSwitchTest/RCSwitchTest.ino

@@ -0,0 +1,48 @@
+#include <RCSwitch.h>
+
+RCSwitch mySwitch = RCSwitch();
+
+void setup() {
+
+ Serial.begin(9600);
+
+ // Transmitter is connected to Arduino Pin #9
+ mySwitch.enableTransmit(9); 
+
+ // Set Protocol (default is 1, will work for most outlets)
+ //mySwitch.setProtocol(1); 
+
+ // Set pulse length 
+ // NB Pulse length must be set AFTER Protocol, 
+ // because setProtocol(1) also sets pulse length = 350
+ //mySwitch.setPulseLength(232);
+
+ // Optional set number of transmission repetitions.
+ // Mine seem to work with 2, yours may need more
+ //mySwitch.setRepeatTransmit(2);
+}
+
+// Switch channel 8 on and off every 1 second
+void loop() {
+ command(8, 1);
+ delay(1000);
+ command(8, 0);
+ delay(1000);
+}
+
+void command(int nAddress, int nData) {
+
+ // List of device addresses - may be different for your devices
+ char* addressCodes[8] = { "01110000", "00110000", "01010000", "00010000", "01100000", "00100000", "01000000", "00000000" };
+
+ // List of commands - may be different for your devices
+ char* dataCodes[2] = { "0000", "1000" };
+
+ // Concatenate the Address and Data codes into a single codeword
+ char sendCode[13] = "";
+ strcat(sendCode, addressCodes[nAddress-1]);
+ strcat(sendCode, dataCodes[nData]);
+
+ // Send the code
+ mySwitch.sendTriState(sendCode);
+}