first commit
This commit is contained in:
Jérôme Delacotte
383
UTouch_Calibration/UTouch_Calibration.ino
Executable file
383
UTouch_Calibration/UTouch_Calibration.ino
Executable file
@@ -0,0 +1,383 @@
|
||||
// UTouch_Calibration
|
||||
// Copyright (C)2015 Rinky-Dink Electronics, Henning Karlsen. All right reserved
|
||||
// web: http://www.RinkyDinkElectronics.com/
|
||||
//
|
||||
// This program can be used to calibrate the touchscreen
|
||||
// of the display modules.
|
||||
// This program requires the UTFT library and a touch
|
||||
// screen module that is compatible with UTFT.
|
||||
//
|
||||
// It is assumed that the display module is connected to an
|
||||
// appropriate shield or that you know how to change the pin
|
||||
// numbers in the setup.
|
||||
//
|
||||
// Instructions will be given on the display.
|
||||
//
|
||||
|
||||
#include <UTFT.h>
|
||||
#include <UTouch.h>
|
||||
|
||||
// Define the orientation of the touch screen. Further
|
||||
// information can be found in the instructions.
|
||||
#define TOUCH_ORIENTATION PORTRAIT
|
||||
|
||||
// Initialize display
|
||||
// ------------------
|
||||
// Set the pins to the correct ones for your development board
|
||||
// -----------------------------------------------------------
|
||||
// Standard Arduino Uno/2009 Shield : <display model>,19,18,17,16
|
||||
// Standard Arduino Mega/Due shield : <display model>,38,39,40,41
|
||||
// CTE TFT LCD/SD Shield for Arduino Due : <display model>,25,26,27,28
|
||||
// Teensy 3.x TFT Test Board : <display model>,23,22, 3, 4
|
||||
// ElecHouse TFT LCD/SD Shield for Arduino Due : <display model>,22,23,31,33
|
||||
//
|
||||
// Remember to change the model parameter to suit your display module!
|
||||
UTFT myGLCD(ITDB32S,19,18,17,16);
|
||||
|
||||
// Initialize touchscreen
|
||||
// ----------------------
|
||||
// Set the pins to the correct ones for your development board
|
||||
// -----------------------------------------------------------
|
||||
// Standard Arduino Uno/2009 Shield : 15,10,14, 9, 8
|
||||
// Standard Arduino Mega/Due shield : 6, 5, 4, 3, 2
|
||||
// CTE TFT LCD/SD Shield for Arduino Due : 6, 5, 4, 3, 2
|
||||
// Teensy 3.x TFT Test Board : 26,31,27,28,29
|
||||
// ElecHouse TFT LCD/SD Shield for Arduino Due : 25,26,27,29,30
|
||||
//
|
||||
UTouch myTouch( 15,10,14, 9, 8);
|
||||
|
||||
// ************************************
|
||||
// DO NOT EDIT ANYTHING BELOW THIS LINE
|
||||
// ************************************
|
||||
|
||||
// Declare which fonts we will be using
|
||||
extern uint8_t SmallFont[];
|
||||
|
||||
uint32_t cx, cy;
|
||||
uint32_t rx[8], ry[8];
|
||||
uint32_t clx, crx, cty, cby;
|
||||
float px, py;
|
||||
int dispx, dispy, text_y_center;
|
||||
uint32_t calx, caly, cals;
|
||||
char buf[13];
|
||||
|
||||
void setup()
|
||||
{
|
||||
myGLCD.InitLCD();
|
||||
myGLCD.clrScr();
|
||||
myGLCD.setFont(SmallFont);
|
||||
|
||||
myTouch.InitTouch(TOUCH_ORIENTATION);
|
||||
dispx=myGLCD.getDisplayXSize();
|
||||
dispy=myGLCD.getDisplayYSize();
|
||||
text_y_center=(dispy/2)-6;
|
||||
}
|
||||
|
||||
void drawCrossHair(int x, int y)
|
||||
{
|
||||
myGLCD.drawRect(x-10, y-10, x+10, y+10);
|
||||
myGLCD.drawLine(x-5, y, x+5, y);
|
||||
myGLCD.drawLine(x, y-5, x, y+5);
|
||||
}
|
||||
|
||||
void readCoordinates()
|
||||
{
|
||||
int iter = 5000;
|
||||
int failcount = 0;
|
||||
int cnt = 0;
|
||||
uint32_t tx=0;
|
||||
uint32_t ty=0;
|
||||
boolean OK = false;
|
||||
|
||||
while (OK == false)
|
||||
{
|
||||
myGLCD.setColor(255, 255, 255);
|
||||
myGLCD.print("* PRESS *", CENTER, text_y_center);
|
||||
while (myTouch.dataAvailable() == false) {}
|
||||
myGLCD.print("* HOLD! *", CENTER, text_y_center);
|
||||
while ((myTouch.dataAvailable() == true) && (cnt<iter) && (failcount<10000))
|
||||
{
|
||||
myTouch.calibrateRead();
|
||||
if (!((myTouch.TP_X==65535) || (myTouch.TP_Y==65535)))
|
||||
{
|
||||
tx += myTouch.TP_X;
|
||||
ty += myTouch.TP_Y;
|
||||
cnt++;
|
||||
}
|
||||
else
|
||||
failcount++;
|
||||
}
|
||||
if (cnt>=iter)
|
||||
{
|
||||
OK = true;
|
||||
}
|
||||
else
|
||||
{
|
||||
tx = 0;
|
||||
ty = 0;
|
||||
cnt = 0;
|
||||
}
|
||||
if (failcount>=10000)
|
||||
fail();
|
||||
}
|
||||
|
||||
cx = tx / iter;
|
||||
cy = ty / iter;
|
||||
}
|
||||
|
||||
void calibrate(int x, int y, int i)
|
||||
{
|
||||
myGLCD.setColor(255, 255, 255);
|
||||
drawCrossHair(x,y);
|
||||
myGLCD.setBackColor(255, 0, 0);
|
||||
readCoordinates();
|
||||
myGLCD.setColor(255, 255, 255);
|
||||
myGLCD.print("* RELEASE *", CENTER, text_y_center);
|
||||
myGLCD.setColor(80, 80, 80);
|
||||
drawCrossHair(x,y);
|
||||
rx[i]=cx;
|
||||
ry[i]=cy;
|
||||
while (myTouch.dataAvailable() == true) {}
|
||||
}
|
||||
|
||||
void waitForTouch()
|
||||
{
|
||||
while (myTouch.dataAvailable() == true) {}
|
||||
while (myTouch.dataAvailable() == false) {}
|
||||
while (myTouch.dataAvailable() == true) {}
|
||||
}
|
||||
|
||||
void toHex(uint32_t num)
|
||||
{
|
||||
buf[0] = '0';
|
||||
buf[1] = 'x';
|
||||
buf[10] = 'U';
|
||||
buf[11] = 'L';
|
||||
buf[12] = 0;
|
||||
for (int zz=9; zz>1; zz--)
|
||||
{
|
||||
if ((num & 0xF) > 9)
|
||||
buf[zz] = (num & 0xF) + 55;
|
||||
else
|
||||
buf[zz] = (num & 0xF) + 48;
|
||||
num=num>>4;
|
||||
}
|
||||
}
|
||||
|
||||
void startup()
|
||||
{
|
||||
myGLCD.setColor(255, 0, 0);
|
||||
myGLCD.fillRect(0, 0, dispx-1, 13);
|
||||
myGLCD.setColor(255, 255, 255);
|
||||
myGLCD.setBackColor(255, 0, 0);
|
||||
myGLCD.drawLine(0, 14, dispx-1, 14);
|
||||
myGLCD.print("UTouch Calibration", CENTER, 1);
|
||||
myGLCD.setBackColor(0, 0, 0);
|
||||
|
||||
if (dispx==220)
|
||||
{
|
||||
myGLCD.print("Use a stylus or something", LEFT, 30);
|
||||
// myGLCD.print("similar to touch as close", LEFT, 42);
|
||||
// myGLCD.print("to the center of the", LEFT, 54);
|
||||
// myGLCD.print("highlighted crosshair as", LEFT, 66);
|
||||
// myGLCD.print("possible. Keep as still as", LEFT, 78);
|
||||
// myGLCD.print("possible and keep holding", LEFT, 90);
|
||||
// myGLCD.print("until the highlight is", LEFT, 102);
|
||||
// myGLCD.print("removed. Repeat for all", LEFT, 114);
|
||||
// myGLCD.print("crosshairs in sequence.", LEFT, 126);
|
||||
// myGLCD.print("Touch screen to continue", CENTER, 162);
|
||||
}
|
||||
else
|
||||
{
|
||||
myGLCD.print("INSTRUCTIONS", CENTER, 30);
|
||||
// myGLCD.print("Use a stylus or something similar to", LEFT, 50);
|
||||
// myGLCD.print("touch as close to the center of the", LEFT, 62);
|
||||
// myGLCD.print("highlighted crosshair as possible. Keep", LEFT, 74);
|
||||
// myGLCD.print("as still as possible and keep holding", LEFT, 86);
|
||||
// myGLCD.print("until the highlight is removed. Repeat", LEFT, 98);
|
||||
// myGLCD.print("for all crosshairs in sequence.", LEFT, 110);
|
||||
//
|
||||
// myGLCD.print("Further instructions will be displayed", LEFT, 134);
|
||||
// myGLCD.print("when the calibration is complete.", LEFT, 146);
|
||||
//
|
||||
// myGLCD.print("Do NOT use your finger as a calibration", LEFT, 170);
|
||||
// myGLCD.print("stylus or the result WILL BE imprecise.", LEFT, 182);
|
||||
|
||||
myGLCD.print("Touch screen to continue", CENTER, 226);
|
||||
}
|
||||
|
||||
waitForTouch();
|
||||
myGLCD.clrScr();
|
||||
}
|
||||
|
||||
void done()
|
||||
{
|
||||
myGLCD.clrScr();
|
||||
myGLCD.setColor(255, 0, 0);
|
||||
myGLCD.fillRect(0, 0, dispx-1, 13);
|
||||
myGLCD.setColor(255, 255, 255);
|
||||
myGLCD.setBackColor(255, 0, 0);
|
||||
myGLCD.drawLine(0, 14, dispx-1, 14);
|
||||
myGLCD.print("UTouch Calibration", CENTER, 1);
|
||||
myGLCD.setBackColor(0, 0, 0);
|
||||
|
||||
if (dispx==220)
|
||||
{
|
||||
myGLCD.print("To use the new calibration", LEFT, 30);
|
||||
myGLCD.print("settings you must edit the", LEFT, 42);
|
||||
myGLCD.setColor(160, 160, 255);
|
||||
myGLCD.print("UTouchCD.h", LEFT, 54);
|
||||
myGLCD.setColor(255, 255, 255);
|
||||
myGLCD.print("file and change", 88, 54);
|
||||
myGLCD.print("the following values. The", LEFT, 66);
|
||||
myGLCD.print("values are located right", LEFT, 78);
|
||||
myGLCD.print("below the opening comment.", LEFT, 90);
|
||||
myGLCD.print("CAL_X", LEFT, 110);
|
||||
myGLCD.print("CAL_Y", LEFT, 122);
|
||||
myGLCD.print("CAL_S", LEFT, 134);
|
||||
toHex(calx);
|
||||
myGLCD.print(buf, 75, 110);
|
||||
toHex(caly);
|
||||
myGLCD.print(buf, 75, 122);
|
||||
toHex(cals);
|
||||
myGLCD.print(buf, 75, 134);
|
||||
}
|
||||
else
|
||||
{
|
||||
myGLCD.print("CALIBRATION COMPLETE", CENTER, 30);
|
||||
myGLCD.print("To use the new calibration", LEFT, 50);
|
||||
myGLCD.print("settings you must edit the", LEFT, 62);
|
||||
myGLCD.setColor(160, 160, 255);
|
||||
myGLCD.print("UTouchCD.h", LEFT, 74);
|
||||
myGLCD.setColor(255, 255, 255);
|
||||
myGLCD.print("file and change", 88, 74);
|
||||
myGLCD.print("the following values.", LEFT, 86);
|
||||
myGLCD.print("The values are located right", LEFT, 98);
|
||||
myGLCD.print("below the opening comment in", LEFT, 110);
|
||||
myGLCD.print("the file.", LEFT, 122);
|
||||
myGLCD.print("CAL_X", LEFT, 150);
|
||||
myGLCD.print("CAL_Y", LEFT, 162);
|
||||
myGLCD.print("CAL_S", LEFT, 174);
|
||||
|
||||
toHex(calx);
|
||||
myGLCD.print(buf, 75, 150);
|
||||
toHex(caly);
|
||||
myGLCD.print(buf, 75, 162);
|
||||
toHex(cals);
|
||||
myGLCD.print(buf, 75, 174);
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
void fail()
|
||||
{
|
||||
myGLCD.clrScr();
|
||||
myGLCD.setColor(255, 0, 0);
|
||||
myGLCD.fillRect(0, 0, dispx-1, 13);
|
||||
myGLCD.setColor(255, 255, 255);
|
||||
myGLCD.setBackColor(255, 0, 0);
|
||||
myGLCD.drawLine(0, 14, dispx-1, 14);
|
||||
myGLCD.print("UTouch Calibration FAILED", CENTER, 1);
|
||||
myGLCD.setBackColor(0, 0, 0);
|
||||
|
||||
myGLCD.print("Unable to read the position", LEFT, 30);
|
||||
myGLCD.print("of the press. This is a", LEFT, 42);
|
||||
myGLCD.print("hardware issue and can", 88, 54);
|
||||
myGLCD.print("not be corrected in", LEFT, 66);
|
||||
myGLCD.print("software.", LEFT, 78);
|
||||
|
||||
while(true) {};
|
||||
}
|
||||
|
||||
void loop()
|
||||
{
|
||||
startup();
|
||||
|
||||
myGLCD.setColor(80, 80, 80);
|
||||
drawCrossHair(dispx-11, 10);
|
||||
drawCrossHair(dispx/2, 10);
|
||||
drawCrossHair(10, 10);
|
||||
drawCrossHair(dispx-11, dispy/2);
|
||||
drawCrossHair(10, dispy/2);
|
||||
drawCrossHair(dispx-11, dispy-11);
|
||||
drawCrossHair(dispx/2, dispy-11);
|
||||
drawCrossHair(10, dispy-11);
|
||||
myGLCD.setColor(255, 255, 255);
|
||||
myGLCD.setBackColor(255, 0, 0);
|
||||
myGLCD.print("***********", CENTER, text_y_center-12);
|
||||
myGLCD.print("***********", CENTER, text_y_center+12);
|
||||
|
||||
calibrate(10, 10, 0);
|
||||
calibrate(10, dispy/2, 1);
|
||||
calibrate(10, dispy-11, 2);
|
||||
calibrate(dispx/2, 10, 3);
|
||||
calibrate(dispx/2, dispy-11, 4);
|
||||
calibrate(dispx-11, 10, 5);
|
||||
calibrate(dispx-11, dispy/2, 6);
|
||||
calibrate(dispx-11, dispy-11, 7);
|
||||
|
||||
if (TOUCH_ORIENTATION == LANDSCAPE)
|
||||
cals=(long(dispx-1)<<12)+(dispy-1);
|
||||
else
|
||||
cals=(long(dispy-1)<<12)+(dispx-1);
|
||||
|
||||
if (TOUCH_ORIENTATION == PORTRAIT)
|
||||
px = abs(((float(rx[2]+rx[4]+rx[7])/3)-(float(rx[0]+rx[3]+rx[5])/3))/(dispy-20)); // PORTRAIT
|
||||
else
|
||||
px = abs(((float(rx[5]+rx[6]+rx[7])/3)-(float(rx[0]+rx[1]+rx[2])/3))/(dispy-20)); // LANDSCAPE
|
||||
|
||||
if (TOUCH_ORIENTATION == PORTRAIT)
|
||||
{
|
||||
clx = (((rx[0]+rx[3]+rx[5])/3)); // PORTRAIT
|
||||
crx = (((rx[2]+rx[4]+rx[7])/3)); // PORTRAIT
|
||||
}
|
||||
else
|
||||
{
|
||||
clx = (((rx[0]+rx[1]+rx[2])/3)); // LANDSCAPE
|
||||
crx = (((rx[5]+rx[6]+rx[7])/3)); // LANDSCAPE
|
||||
}
|
||||
if (clx<crx)
|
||||
{
|
||||
clx = clx - (px*10);
|
||||
crx = crx + (px*10);
|
||||
}
|
||||
else
|
||||
{
|
||||
clx = clx + (px*10);
|
||||
crx = crx - (px*10);
|
||||
}
|
||||
|
||||
if (TOUCH_ORIENTATION == PORTRAIT)
|
||||
py = abs(((float(ry[5]+ry[6]+ry[7])/3)-(float(ry[0]+ry[1]+ry[2])/3))/(dispx-20)); // PORTRAIT
|
||||
else
|
||||
py = abs(((float(ry[0]+ry[3]+ry[5])/3)-(float(ry[2]+ry[4]+ry[7])/3))/(dispx-20)); // LANDSCAPE
|
||||
|
||||
if (TOUCH_ORIENTATION == PORTRAIT)
|
||||
{
|
||||
cty = (((ry[5]+ry[6]+ry[7])/3)); // PORTRAIT
|
||||
cby = (((ry[0]+ry[1]+ry[2])/3)); // PORTRAIT
|
||||
}
|
||||
else
|
||||
{
|
||||
cty = (((ry[0]+ry[3]+ry[5])/3)); // LANDSCAPE
|
||||
cby = (((ry[2]+ry[4]+ry[7])/3)); // LANDSCAPE
|
||||
}
|
||||
if (cty<cby)
|
||||
{
|
||||
cty = cty - (py*10);
|
||||
cby = cby + (py*10);
|
||||
}
|
||||
else
|
||||
{
|
||||
cty = cty + (py*10);
|
||||
cby = cby - (py*10);
|
||||
}
|
||||
|
||||
calx = (long(clx)<<14) + long(crx);
|
||||
caly = (long(cty)<<14) + long(cby);
|
||||
if (TOUCH_ORIENTATION == LANDSCAPE)
|
||||
cals = cals + (1L<<31);
|
||||
|
||||
done();
|
||||
while(true) {}
|
||||
}
|
||||
Reference in New Issue
Block a user