first commit

libraries/Blynk/examples/Blynk.Edgent/Edgent_ESP32/Settings.h

@@ -0,0 +1,133 @@
+
+/*
+ * Board configuration (see examples below).
+ */
+
+#if defined(USE_WROVER_BOARD)
+
+  #define BOARD_BUTTON_PIN            15
+  #define BOARD_BUTTON_ACTIVE_LOW     true
+
+  #define BOARD_LED_PIN_R             0
+  #define BOARD_LED_PIN_G             2
+  #define BOARD_LED_PIN_B             4
+  #define BOARD_LED_INVERSE           false
+  #define BOARD_LED_BRIGHTNESS        128
+
+#elif defined(USE_TTGO_T7)
+
+  #warning "This board does not have a button. Connect a button to gpio0 <> GND"
+
+  #define BOARD_BUTTON_PIN            0
+  #define BOARD_BUTTON_ACTIVE_LOW     true
+
+  #define BOARD_LED_PIN               19
+  #define BOARD_LED_INVERSE           false
+  #define BOARD_LED_BRIGHTNESS        64
+
+#elif defined(USE_TTGO_T_OI)
+
+  #warning "This board does not have a button. Connect a button to gpio0 <> GND"
+
+  #define BOARD_BUTTON_PIN            0
+  #define BOARD_BUTTON_ACTIVE_LOW     true
+
+  #define BOARD_LED_PIN               3
+  #define BOARD_LED_INVERSE           false
+  #define BOARD_LED_BRIGHTNESS        64
+
+#elif defined(USE_ESP32_DEV_MODULE)
+
+  #warning "The LED of this board is not configured"
+
+  #define BOARD_BUTTON_PIN            0
+  #define BOARD_BUTTON_ACTIVE_LOW     true
+
+#elif defined(USE_ESP32C3_DEV_MODULE)
+
+  #define BOARD_BUTTON_PIN            9
+  #define BOARD_BUTTON_ACTIVE_LOW     true
+
+  #define BOARD_LED_PIN_WS2812        8
+  #define BOARD_LED_INVERSE           false
+  #define BOARD_LED_BRIGHTNESS        32
+
+#elif defined(USE_ESP32S2_DEV_KIT)
+
+  #define BOARD_BUTTON_PIN            0
+  #define BOARD_BUTTON_ACTIVE_LOW     true
+
+  #define BOARD_LED_PIN               19
+  #define BOARD_LED_INVERSE           false
+  #define BOARD_LED_BRIGHTNESS        128
+
+#else
+
+  #warning "Custom board configuration is used"
+
+  #define BOARD_BUTTON_PIN            0                     // Pin where user button is attached
+  #define BOARD_BUTTON_ACTIVE_LOW     true                  // true if button is "active-low"
+
+  //#define BOARD_LED_PIN             4                     // Set LED pin - if you have a single-color LED attached
+  //#define BOARD_LED_PIN_R           15                    // Set R,G,B pins - if your LED is PWM RGB
+  //#define BOARD_LED_PIN_G           12
+  //#define BOARD_LED_PIN_B           13
+  //#define BOARD_LED_PIN_WS2812      4                     // Set if your LED is WS2812 RGB
+  #define BOARD_LED_INVERSE           false                 // true if LED is common anode, false if common cathode
+  #define BOARD_LED_BRIGHTNESS        64                    // 0..255 brightness control
+
+#endif
+
+
+/*
+ * Advanced options
+ */
+
+#define BUTTON_HOLD_TIME_INDICATION   3000
+#define BUTTON_HOLD_TIME_ACTION       10000
+#define BUTTON_PRESS_TIME_ACTION      50
+
+#define BOARD_PWM_MAX                 1023
+
+#define BOARD_LEDC_CHANNEL_1          1
+#define BOARD_LEDC_CHANNEL_2          2
+#define BOARD_LEDC_CHANNEL_3          3
+#define BOARD_LEDC_TIMER_BITS         10
+#define BOARD_LEDC_BASE_FREQ          12000
+
+#if !defined(CONFIG_DEVICE_PREFIX)
+#define CONFIG_DEVICE_PREFIX          "Blynk"
+#endif
+#if !defined(CONFIG_AP_URL)
+#define CONFIG_AP_URL                 "blynk.setup"
+#endif
+#if !defined(CONFIG_DEFAULT_SERVER)
+#define CONFIG_DEFAULT_SERVER         "blynk.cloud"
+#endif
+#if !defined(CONFIG_DEFAULT_PORT)
+#define CONFIG_DEFAULT_PORT           443
+#endif
+
+#define WIFI_CLOUD_MAX_RETRIES        500
+#define WIFI_NET_CONNECT_TIMEOUT      50000
+#define WIFI_CLOUD_CONNECT_TIMEOUT    50000
+#define WIFI_AP_IP                    IPAddress(192, 168, 4, 1)
+#define WIFI_AP_Subnet                IPAddress(255, 255, 255, 0)
+//#define WIFI_CAPTIVE_PORTAL_ENABLE
+
+//#define USE_TICKER
+//#define USE_TIMER_ONE
+//#define USE_TIMER_THREE
+//#define USE_TIMER_FIVE
+#define USE_PTHREAD
+
+#define BLYNK_NO_DEFAULT_BANNER
+
+#if defined(APP_DEBUG)
+  #define DEBUG_PRINT(...)  BLYNK_LOG1(__VA_ARGS__)
+  #define DEBUG_PRINTF(...) BLYNK_LOG(__VA_ARGS__)
+#else
+  #define DEBUG_PRINT(...)
+  #define DEBUG_PRINTF(...)
+#endif
+