first commit

2025-03-06 11:15:32 +01:00
commit 7b30d6e298
5276 changed files with 2108927 additions and 0 deletions
--- a/libraries/Blynk/examples/Blynk.Edgent/Edgent_NCP/Edgent_NCP.ino
+++ b/libraries/Blynk/examples/Blynk.Edgent/Edgent_NCP/Edgent_NCP.ino
@@ -0,0 +1,97 @@
+/*************************************************************
+  Blynk is a platform with iOS and Android apps to control
+  ESP32, Arduino, Raspberry Pi and the likes over the Internet.
+  You can easily build mobile and web interfaces for any
+  projects by simply dragging and dropping widgets.
+
+    Downloads, docs, tutorials: https://www.blynk.io
+    Sketch generator:           https://examples.blynk.cc
+    Blynk community:            https://community.blynk.cc
+    Follow us:                  https://www.fb.com/blynkapp
+                                https://twitter.com/blynk_app
+
+  Blynk library is licensed under MIT license
+ *************************************************************
+
+  NOTE: This example requires the connectivity module on your board to be
+        flashed using Blynk.NCP firmware.
+
+   The easiest way to install the NCP firmware is using this PlatformIO project:
+   https://github.com/blynkkk/BlynkNcpExample
+
+ *************************************************************/
+
+/* Fill in information from your Blynk Template here */
+/* Read more: https://bit.ly/BlynkInject */
+//#define BLYNK_TEMPLATE_ID           "TMPxxxxxx"
+//#define BLYNK_TEMPLATE_NAME         "Device"
+
+/* The firmware version of the Primary MCU (used for OTA updates) */
+#define BLYNK_FIRMWARE_VERSION        "0.1.0"
+
+// Debug output
+#define BLYNK_PRINT                   Serial
+
+// Redefine NCP connection port settings, if needed
+//#define BLYNK_NCP_SERIAL            Serial1
+//#define BLYNK_NCP_BAUD              2000000
+
+#include <BlynkEdgentNCP.h>
+
+BlynkTimer timer;
+
+BLYNK_CONNECTED() {
+  BLYNK_LOG("Connected to Blynk 🙌");
+}
+
+BLYNK_DISCONNECTED() {
+  BLYNK_LOG("Blynk disconnected");
+}
+
+void setup() {
+  Serial.begin(115200);
+  Serial.println();
+
+  // Give Serial Monitor some time to connect
+  delay(3000);
+
+  BLYNK_LOG("Main firmware: %s", BLYNK_FIRMWARE_VERSION);
+  BLYNK_LOG("Build: %s", __DATE__ " " __TIME__);
+
+  // Initialize the Blynk.NCP hardware
+  if (Blynk.initNCP()) {
+    String ver = Blynk.getNcpVersion();
+    BLYNK_LOG("Blynk.NCP firmware: %s", ver.c_str());
+  } else {
+    BLYNK_LOG("Cannot communicate to Blynk.NCP");
+    BLYNK_LOG("  Please ensure you have flashed your board with the Blynk.NCP firmware, before running this example.");
+    BLYNK_LOG("  See: https://github.com/blynkkk/BlynkNcpExample");
+    return;
+  }
+
+  // Print state changes
+  Blynk.onStateChange([]() {
+    BLYNK_LOG("State: %s", Blynk.getStateString());
+  });
+
+  // Set config mode timeout to 30 minutes, for testing purposes
+  Blynk.setConfigTimeout(30*60);
+
+  // White labeling (use this ONLY if you have a branded Blynk App)
+  //Blynk.setVendorPrefix("MyCompany");
+  //Blynk.setVendorServer("dashboard.mycompany.com");
+
+  // Product setup
+  Blynk.begin(BLYNK_TEMPLATE_ID, BLYNK_TEMPLATE_NAME);
+
+  // Publish some data periodically
+  timer.setInterval(1000, []() {
+    Blynk.virtualWrite(V0, millis() / 1000);
+  });
+}
+
+void loop() {
+  timer.run();
+  Blynk.run();
+  delay(1);
+}