first commit

2025-03-06 11:15:32 +01:00
commit 7b30d6e298
5276 changed files with 2108927 additions and 0 deletions
--- a/libraries/Blynk/examples/Boards_ArduinoClient/Arduino_Ethernet/Arduino_Ethernet.ino
+++ b/libraries/Blynk/examples/Boards_ArduinoClient/Arduino_Ethernet/Arduino_Ethernet.ino
@@ -0,0 +1,104 @@
+/*************************************************************
+  Blynk is a platform with iOS and Android apps to control
+  ESP32, Arduino, Raspberry Pi and the likes over the Internet.
+  You can easily build mobile and web interfaces for any
+  projects by simply dragging and dropping widgets.
+
+    Downloads, docs, tutorials: https://www.blynk.io
+    Sketch generator:           https://examples.blynk.cc
+    Blynk community:            https://community.blynk.cc
+    Follow us:                  https://www.fb.com/blynkapp
+                                https://twitter.com/blynk_app
+
+  Blynk library is licensed under MIT license
+  This example code is in public domain.
+ *************************************************************
+  This sketch shows how to use an Arduino Client directly in Blynk.
+  Using a standard Client interface is a convenient way to integrate
+  any connectivity shield, even if it's not directly supported by Blynk.
+
+  NOTE: Pins 10, 11, 12 and 13 are reserved for Ethernet module.
+        DON'T use them in your sketch directly!
+
+  WARNING: If you have an SD card, you may need to disable it
+        by setting pin 4 to HIGH. Read more here:
+        https://www.arduino.cc/en/Main/ArduinoEthernetShield
+ *************************************************************/
+
+/* Comment this out to disable prints and save space */
+#define BLYNK_PRINT Serial
+
+/* Uncomment this to see the verbose Blynk protocol log */
+//#define BLYNK_DEBUG
+
+/* Fill in information from Blynk Device Info here */
+/* Read more: https://bit.ly/BlynkSimpleAuth */
+//#define BLYNK_TEMPLATE_ID           "TMPxxxxxx"
+//#define BLYNK_TEMPLATE_NAME         "Device"
+//#define BLYNK_AUTH_TOKEN            "YourAuthToken"
+
+/* BlynkMultiClient allows attaching Blynk to the standard Arduino Client,
+   and also allows multiple (up to 4) connections to be registered.
+   NOTE: don't replace it with any of the BlynkSimple*.h variants */
+#include <BlynkMultiClient.h>
+
+/*
+ * Ethernet
+ */
+
+// You can specify your board mac adress
+byte ETH_MAC[] =        { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED };
+
+#include <SPI.h>
+#include <Ethernet.h>   // For ENC28J60, replace this with <EthernetENC.h> library
+
+// Ethernet shield and SDcard pins
+#define W5100_CS   10
+#define SDCARD_CS  4
+
+static EthernetClient blynkEthernetClient;
+
+/*
+ * Main
+ */
+
+void connectEthernet()
+{
+  if (Ethernet.begin(ETH_MAC, 5000L, 500L)) {
+    Serial.print("Ethernet IP: ");
+    Serial.println(Ethernet.localIP());
+  } else if (Ethernet.hardwareStatus() == EthernetNoHardware) {
+    Serial.println("Ethernet shield was not found.");
+  } else if (Ethernet.linkStatus() == LinkOFF) {
+    Serial.println("Ethernet cable is not connected.");
+  } else {
+    Serial.println("Ethernet: DHCP configuration failed.");
+  }
+}
+
+void setup()
+{
+  // Debug console
+  Serial.begin(115200);
+
+  // Deselect the SD card
+  pinMode(SDCARD_CS, OUTPUT);
+  digitalWrite(SDCARD_CS, HIGH);
+
+  // Initialize Ethernet shield
+  Ethernet.init(W5100_CS);
+  delay(1000); // Give the Ethernet shield a second to initialize
+
+  connectEthernet();
+
+  // Setup Blynk
+  Blynk.addClient("ETH", blynkEthernetClient, 80);
+  Blynk.config(BLYNK_AUTH_TOKEN);
+}
+
+void loop()
+{
+  Blynk.run();
+  Ethernet.maintain();
+}
+