first commit

libraries/MySensors/examples_linux/mysgw.cpp

@@ -0,0 +1,102 @@
+/*
+ * The MySensors Arduino library handles the wireless radio link and protocol
+ * between your home built sensors/actuators and HA controller of choice.
+ * The sensors forms a self healing radio network with optional repeaters. Each
+ * repeater and gateway builds a routing tables in EEPROM which keeps track of the
+ * network topology allowing messages to be routed to nodes.
+ *
+ * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
+ * Copyright (C) 2013-2019 Sensnology AB
+ * Full contributor list: https://github.com/mysensors/MySensors/graphs/contributors
+ *
+ * Documentation: http://www.mysensors.org
+ * Support Forum: http://forum.mysensors.org
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ */
+
+#include <iostream>
+#include <cstdio>
+#include <unistd.h>
+
+// For more options run ./configure --help
+
+// Config file
+//#define MY_LINUX_CONFIG_FILE "/etc/mysensors.conf"
+
+// How many clients should be able to connect to this gateway (default 1)
+#define MY_GATEWAY_MAX_CLIENTS 10
+
+// Serial config
+// Enable this if you are using an Arduino connected to the USB
+//#define MY_LINUX_SERIAL_PORT "/dev/ttyUSB0"
+// Enable this if you need to connect to a controller running on the same device
+// You also need to define MY_LINUX_SERIAL_PORT above with the symlink name for the PTY device
+//#define MY_LINUX_SERIAL_IS_PTY
+// Grant access to the specified system group for the serial device
+//#define MY_LINUX_SERIAL_GROUPNAME "tty"
+
+// MQTT options
+//#define MY_CONTROLLER_IP_ADDRESS 192, 168, 178, 68
+//#define MY_PORT 1883
+//#define MY_MQTT_CLIENT_ID "mysensors-1"
+//#define MY_MQTT_PUBLISH_TOPIC_PREFIX "mygateway1-out"
+//#define MY_MQTT_SUBSCRIBE_TOPIC_PREFIX "mygateway1-in"
+
+// Enable these if your MQTT broker requires username/password
+//#define MY_MQTT_USER "username"
+//#define MY_MQTT_PASSWORD "password"
+
+// Flash leds on rx/tx/err
+//#define MY_DEFAULT_ERR_LED_PIN 12  // Error LED pin
+//#define MY_DEFAULT_RX_LED_PIN  16  // Receive LED pin
+//#define MY_DEFAULT_TX_LED_PIN  18  // Transmit LED pin
+// Inverse the blinking feature
+//#define MY_WITH_LEDS_BLINKING_INVERSE
+
+// Enable software signing
+//#define MY_SIGNING_SOFT
+// Enable signing related debug
+//#define MY_DEBUG_VERBOSE_SIGNING
+// Enable this to request signatures
+//#define MY_SIGNING_REQUEST_SIGNATURES
+// Enable this to to weaken security for gradual deployment purpose
+// (see signing documentation for details)
+//#define MY_SIGNING_WEAK_SECURITY
+
+// Enables RF24 encryption (all nodes and gateway must have this enabled, and all must be
+// personalized with the same AES key)
+//#define MY_RF24_ENABLE_ENCRYPTION
+
+// Enable inclusion mode if your HA Controller supports it (e.g. Vera Controller)
+//#define MY_INCLUSION_MODE_FEATURE
+// Enable Inclusion mode button on gateway
+//#define MY_INCLUSION_BUTTON_FEATURE
+// Set inclusion mode duration (in seconds)
+//#define MY_INCLUSION_MODE_DURATION 60
+// Digital pin used for inclusion mode button
+//#define MY_INCLUSION_MODE_BUTTON_PIN  3
+
+#include <MySensors.h>
+
+#define ARDUINO 100
+// This space is intended to be used to include arduino libraries
+
+#undef ARDUINO
+
+void setup()
+{
+	// Setup locally attached sensors
+}
+
+void presentation()
+{
+	// Present locally attached sensors here
+}
+
+void loop()
+{
+	// Send locally attached sensors data here
+}