first commit

libraries/SmartRC-CC1101-Driver-Lib/examples/ESPiLight examples cc1101/Transmit_Raw_cc1101/Transmit_Raw_cc1101.ino

@@ -0,0 +1,58 @@
+/*
+ Basic ESPiLight transmit RAW signal example
+
+ https://github.com/puuu/espilight
+ https://github.com/LSatan/SmartRC-CC1101-Driver-Lib
+ ----------------------------------------------------------
+ Mod by Little Satan. Have Fun!
+ ----------------------------------------------------------
+*/
+#include <ELECHOUSE_CC1101_SRC_DRV.h>
+#include <ESPiLight.h>
+
+int TRANSMITTER_PIN;
+
+
+void setup() {
+  Serial.begin(115200);
+
+#ifdef ESP32
+TRANSMITTER_PIN = 2;  // for esp32! Transmit on GPIO pin 2.
+#elif ESP8266
+TRANSMITTER_PIN = 5;  // for esp8266! Transmit on pin 5 = D1.
+#else
+TRANSMITTER_PIN = 6;  // for Arduino! Transmit on pin 6.
+#endif
+
+  if (ELECHOUSE_cc1101.getCC1101()){       // Check the CC1101 Spi connection.
+  Serial.println("Connection OK");
+  }else{
+  Serial.println("Connection Error");
+  }
+
+//CC1101 Settings:                (Settings with "//" are optional!)
+  ELECHOUSE_cc1101.Init();            // must be set to initialize the cc1101!
+//ELECHOUSE_cc1101.setRxBW(812.50);  // Set the Receive Bandwidth in kHz. Value from 58.03 to 812.50. Default is 812.50 kHz.
+//ELECHOUSE_cc1101.setPA(10);       // set TxPower. The following settings are possible depending on the frequency band.  (-30  -20  -15  -10  -6    0    5    7    10   11   12)   Default is max!
+  ELECHOUSE_cc1101.setMHZ(433.92); // Here you can set your basic frequency. The lib calculates the frequency automatically (default = 433.92).The cc1101 can: 300-348 MHZ, 387-464MHZ and 779-928MHZ. Read More info from datasheet.
+  ELECHOUSE_cc1101.SetTx();       // cc1101 set Transmit on
+
+  ESPiLight rf(TRANSMITTER_PIN);
+  
+  int length = 0;
+  uint16_t codes[MAXPULSESTREAMLENGTH];
+
+  // get pulse train from string (format see: pilight USB Nano)
+  length = rf.stringToPulseTrain(
+      "c:102020202020202020220202020020202200202200202020202020220020202203;p:"
+      "279,2511,1395,9486@",
+      codes, MAXPULSESTREAMLENGTH);
+
+  // transmit the pulse train
+  rf.sendPulseTrain(codes, length);
+}
+
+// Toggle state of elro 800 switch evrey 2 s
+void loop() {
+  // stop
+}