first commit

libraries/SmartRC-CC1101-Driver-Lib/examples/ESPiLight examples cc1101/pilight_raw_cc1101/pilight_raw_cc1101.ino

@@ -0,0 +1,67 @@
+/*
+ Basic ESPiLight pilight_raw example
+
+ This example mimic the output of the piligh_raw tool.
+
+ https://github.com/puuu/espilight
+ https://github.com/LSatan/SmartRC-CC1101-Driver-Lib
+ ----------------------------------------------------------
+ Mod by Little Satan. Have Fun!
+ ----------------------------------------------------------
+*/
+#include <ELECHOUSE_CC1101_SRC_DRV.h>
+#include <ESPiLight.h>
+
+int RECEIVER_PIN;  // any intterupt able pin
+int TRANSMITTER_PIN;
+
+ESPiLight rf(TRANSMITTER_PIN);  // use -1 to disable transmitter
+
+// callback function. It is called on successfully received and parsed rc signal
+void rfRawCallback(const uint16_t* pulses, size_t length) {
+  Serial.print("ESPiLight:");
+  for (unsigned int i = 0; i < length; i++) {
+    Serial.print(" ");
+    Serial.print(pulses[i]);
+    if (pulses[i] > 5100) {
+      Serial.printf(" -# ");
+      Serial.println(i);
+    }
+  }
+}
+
+void setup() {
+  Serial.begin(115200);
+
+#ifdef ESP32
+RECEIVER_PIN = 4; TRANSMITTER_PIN = 2;  // for esp32! Receiver on GPIO pin 4. Transmit on GPIO pin 2.
+#elif ESP8266
+RECEIVER_PIN = 4; TRANSMITTER_PIN = 5;  // for esp8266! Receiver on pin 4 = D2. Transmit on pin 5 = D1.
+#else
+RECEIVER_PIN = 0; TRANSMITTER_PIN = 6;  // for Arduino! Receiver on interrupt 0 => that is pin #2. Transmit on pin 6.
+#endif
+
+  if (ELECHOUSE_cc1101.getCC1101()){    // Check the CC1101 Spi connection.
+  Serial.println("Connection OK");
+  }else{
+  Serial.println("Connection Error");
+  }
+
+//CC1101 Settings:                (Settings with "//" are optional!)
+  ELECHOUSE_cc1101.Init();            // must be set to initialize the cc1101!
+//ELECHOUSE_cc1101.setRxBW(812.50);  // Set the Receive Bandwidth in kHz. Value from 58.03 to 812.50. Default is 812.50 kHz.
+//ELECHOUSE_cc1101.setPA(10);       // set TxPower. The following settings are possible depending on the frequency band.  (-30  -20  -15  -10  -6    0    5    7    10   11   12)   Default is max!
+  ELECHOUSE_cc1101.setMHZ(433.92); // Here you can set your basic frequency. The lib calculates the frequency automatically (default = 433.92).The cc1101 can: 300-348 MHZ, 387-464MHZ and 779-928MHZ. Read More info from datasheet.
+  ELECHOUSE_cc1101.SetRx();       // set Receive on
+
+  // set callback funktion for raw messages
+  rf.setPulseTrainCallBack(rfRawCallback);
+  // inittilize receiver
+  rf.initReceiver(RECEIVER_PIN);
+}
+
+void loop() {
+  // process input queue and may fire calllback
+  rf.loop();
+  delay(10);
+}