first commit

2025-03-06 11:15:32 +01:00
commit 7b30d6e298
5276 changed files with 2108927 additions and 0 deletions
--- a/libraries/SmartRC-CC1101-Driver-Lib/examples/NewRemoteSwitch
+++ b/libraries/SmartRC-CC1101-Driver-Lib/examples/NewRemoteSwitch
@@ -0,0 +1,85 @@
+/*
+ * Demo for RF remote switch receiver. 
+ * This example is for the new KaKu / Home Easy type of remotes!
+ *
+ * For details, see NewRemoteReceiver.h!
+ *
+ * With this sketch you can control a LED connected to digital pin 4,
+ * after the sketch learned the code. After start, the LED starts to blink,
+ * until a valid code has been received. The led stops blinking. Now you
+ * can control the LED with the remote.
+ *
+ * Note: only unit-switches are supported in this sketch, no group or dim.
+ *
+ * Arduino only!
+ *
+ *  https://github.com/1technophile/NewRemoteSwitch
+ *  https://github.com/LSatan/SmartRC-CC1101-Driver-Lib
+ *  ----------------------------------------------------------
+ *  Mod by Little Satan. Have Fun!
+ *  ----------------------------------------------------------
+ *
+ */
+#include <ELECHOUSE_CC1101_SRC_DRV.h>
+#include <NewRemoteReceiver.h>
+
+
+int pin = 0; // int for Receive pin.
+int led = 4; // pin for Led.
+
+boolean codeLearned = false;
+unsigned long learnedAddress;
+byte learnedUnit;
+
+void setup() {
+    
+
+//CC1101 Settings:                (Settings with "//" are optional!)
+  ELECHOUSE_cc1101.Init();            // must be set to initialize the cc1101!
+//ELECHOUSE_cc1101.setRxBW(812.50);  // Set the Receive Bandwidth in kHz. Value from 58.03 to 812.50. Default is 812.50 kHz.
+//ELECHOUSE_cc1101.setPA(10);       // set TxPower. The following settings are possible depending on the frequency band.  (-30  -20  -15  -10  -6    0    5    7    10   11   12)   Default is max!
+  ELECHOUSE_cc1101.setMHZ(433.92); // Here you can set your basic frequency. The lib calculates the frequency automatically (default = 433.92).The cc1101 can: 300-348 MHZ, 387-464MHZ and 779-928MHZ. Read More info from datasheet.
+ 
+  ELECHOUSE_cc1101.SetRx();    // set Receive on
+  
+  // LED-pin as output
+  pinMode(led, OUTPUT);
+
+  // Init a new receiver on interrupt pin 0, minimal 2 identical repeats, and callback set to processCode.
+  NewRemoteReceiver::init(pin, 2, processCode);
+}
+
+void loop() {
+  // Blink led until a code has been learned
+  if (!codeLearned) {
+    digitalWrite(13, HIGH);
+    delay(500);
+    digitalWrite(13, LOW);
+    delay(500);
+  }
+}
+
+// Callback function is called only when a valid code is received.
+void processCode(NewRemoteCode receivedCode) {
+  // A code has been received.
+  // Do we already know the code?
+  if (!codeLearned) {
+    // No! Let's learn the received code.
+    learnedAddress = receivedCode.address;
+    learnedUnit = receivedCode.unit;
+    codeLearned = true;    
+  } else {
+    // Yes!    
+    // Is the received code identical to the learned code?
+    if (receivedCode.address == learnedAddress && receivedCode.unit == learnedUnit) {
+      // Yes!
+      // Switch the LED off if the received code was "off".
+      // Anything else (on, dim, on_with_dim) will switch the LED on.
+      if (receivedCode.switchType == NewRemoteCode::off) {
+        digitalWrite(13, LOW);
+      } else {
+        digitalWrite(13, HIGH);
+      }
+    }
+  }
+}