first commit

2025-03-06 11:15:32 +01:00
commit 7b30d6e298
5276 changed files with 2108927 additions and 0 deletions
--- a/libraries/SmartRC-CC1101-Driver-Lib/examples/NewRemoteSwitch
+++ b/libraries/SmartRC-CC1101-Driver-Lib/examples/NewRemoteSwitch
@@ -0,0 +1,81 @@
+/**
+ * Demo for RF remote switch receiver.
+ * For details, see NewRemoteReceiver.h!
+ *
+ * Connect the transmitter to digital pin 6.
+ *
+ * This sketch demonstrates the use of the NewRemoteTransmitter class.
+ *
+ * When run, this sketch switches some pre-defined devices on and off in a loop.
+ *
+ * NOTE: the actual receivers have the address and group numbers in this example
+ * are only for demonstration! If you want to duplicate an existing remote, please
+ * try the "retransmitter"-example instead.
+ * 
+ * To use this actual example, you'd need to "learn" the used code in the receivers
+ * This sketch is unsuited for that.
+ * 
+ * 
+ *  https://github.com/1technophile/NewRemoteSwitch
+ *  https://github.com/LSatan/SmartRC-CC1101-Driver-Lib
+ *  ----------------------------------------------------------
+ *  Mod by Little Satan. Have Fun!
+ *  ----------------------------------------------------------
+ * 
+ */
+#include <ELECHOUSE_CC1101_SRC_DRV.h>
+#include <NewRemoteTransmitter.h>
+
+int pin; // int for Transmit pin.
+
+void setup() {
+
+#ifdef ESP32
+pin = 2;  // for esp32! Transmit on GPIO pin 2.
+#elif ESP8266
+pin = 5;  // for esp8266! Transmit on pin 5 = D1
+#else
+pin = 6;  // for Arduino! Transmit on pin 6.
+#endif 
+
+//CC1101 Settings:                (Settings with "//" are optional!)
+  ELECHOUSE_cc1101.Init();            // must be set to initialize the cc1101!
+//ELECHOUSE_cc1101.setRxBW(812.50);  // Set the Receive Bandwidth in kHz. Value from 58.03 to 812.50. Default is 812.50 kHz.
+//ELECHOUSE_cc1101.setPA(10);       // set TxPower. The following settings are possible depending on the frequency band.  (-30  -20  -15  -10  -6    0    5    7    10   11   12)   Default is max!
+  ELECHOUSE_cc1101.setMHZ(433.92); // Here you can set your basic frequency. The lib calculates the frequency automatically (default = 433.92).The cc1101 can: 300-348 MHZ, 387-464MHZ and 779-928MHZ. Read More info from datasheet.
+
+  ELECHOUSE_cc1101.SetTx();     // cc1101 set Transmit on
+}
+
+void loop() { 
+
+  // Create a transmitter on address 123, using digital pin 6 to transmit, 
+  // with a period duration of 260ms (default), repeating the transmitted
+  // code 2^3=8 times.
+  NewRemoteTransmitter transmitter(123, pin, 260, 3);
+   
+  // Switch unit 2 off
+  transmitter.sendUnit(2, false);
+
+  // Switch all devices in the group off
+  transmitter.sendGroup(false);
+
+  // Set unit 1 to dim-level 3 (range 0-15)
+  transmitter.sendDim(1, 3);  
+
+  // Wait 5 seconds
+  delay(5000);
+  
+
+  // Switch unit 2 on
+  transmitter.sendUnit(2, true);
+
+  // Switch all devices in the group on
+  transmitter.sendGroup(true);
+
+  // Set unit 1 to dim-level 15, full brightness.
+  transmitter.sendDim(1, 15);
+
+  // Wait 5 seconds
+  delay(5000);
+}