first commit

2025-03-06 11:15:32 +01:00
commit 7b30d6e298
5276 changed files with 2108927 additions and 0 deletions
--- a/libraries/SmartRC-CC1101-Driver-Lib/examples/NewRemoteSwitch
+++ b/libraries/SmartRC-CC1101-Driver-Lib/examples/NewRemoteSwitch
@@ -0,0 +1,80 @@
+/*
+ * Demo for RF remote switch receiver.
+ * For details, see NewRemoteReceiver.h!
+ *
+ *
+ * When run, this sketch waits for a valid code from a new-style the receiver,
+ * decodes it, and retransmits it after 5 seconds.
+ * 
+ *  Notes: Arduino only!!!
+ *  
+ *  https://github.com/1technophile/NewRemoteSwitch
+ *  https://github.com/LSatan/SmartRC-CC1101-Driver-Lib
+ *  ----------------------------------------------------------
+ *  Mod by Little Satan. Have Fun!
+ *  ----------------------------------------------------------
+ */
+
+#include <ELECHOUSE_CC1101_SRC_DRV.h>
+#include <NewRemoteReceiver.h>
+#include <NewRemoteTransmitter.h>
+
+void setup() {
+
+//CC1101 Settings:                (Settings with "//" are optional!)
+  ELECHOUSE_cc1101.Init();            // must be set to initialize the cc1101!
+//ELECHOUSE_cc1101.setRxBW(812.50);  // Set the Receive Bandwidth in kHz. Value from 58.03 to 812.50. Default is 812.50 kHz.
+//ELECHOUSE_cc1101.setPA(10);       // set TxPower. The following settings are possible depending on the frequency band.  (-30  -20  -15  -10  -6    0    5    7    10   11   12)   Default is max!
+  ELECHOUSE_cc1101.setMHZ(433.92); // Here you can set your basic frequency. The lib calculates the frequency automatically (default = 433.92).The cc1101 can: 300-348 MHZ, 387-464MHZ and 779-928MHZ. Read More info from datasheet.
+
+  ELECHOUSE_cc1101.SetRx();  // set Receive on 
+  
+  // See example ShowReceivedCode for info on this
+  NewRemoteReceiver::init(0, 2, retransmitter);
+}
+
+void loop() {
+}
+
+void retransmitter(NewRemoteCode receivedCode) {
+  // Disable the receiver; otherwise it might pick up the retransmit as well.
+  NewRemoteReceiver::disable();
+
+  // Need interrupts for delay()
+  interrupts();
+
+  // Wait 5 seconds before sending.
+  delay(5000);
+
+  // Create a new transmitter with the received address and period, use digital pin as output pin
+
+  ELECHOUSE_cc1101.SetTx();  // set Transmit on
+  NewRemoteTransmitter transmitter(receivedCode.address, 6, receivedCode.period);
+
+  if (receivedCode.switchType == NewRemoteCode::dim || 
+    (receivedCode.switchType == NewRemoteCode::on && receivedCode.dimLevelPresent)) {
+    // Dimmer signal received
+
+    if (receivedCode.groupBit) {
+      transmitter.sendGroupDim(receivedCode.dimLevel);
+    } 
+    else {
+      transmitter.sendDim(receivedCode.unit, receivedCode.dimLevel);
+    }
+  } 
+  else {
+    // On/Off signal received
+    bool isOn = receivedCode.switchType == NewRemoteCode::on;
+
+    if (receivedCode.groupBit) {
+      // Send to the group
+      transmitter.sendGroup(isOn);
+    } 
+    else {
+      // Send to a single unit
+      transmitter.sendUnit(receivedCode.unit, isOn);
+    }
+  }
+  ELECHOUSE_cc1101.SetRx();  // set Receive on
+  NewRemoteReceiver::enable();
+}