//extern "C" {
//#include "user_interface.h"
//}

// Need for getVcc
// Disable  ADC_MODE(ADC_VCC);

/////////////////////
// Domoticz Classe
/////////////////////
#include "Domoticz.h"
Domoticz domo("192.168.1.3", "81", "Livebox-37cc", "8A6060920A8A86896F770F2C47");
#include "Modules.h"
Modules  modules;
Params   * params;
  Params p;
  
IPAddress gateway(192, 168, 1, 1);
IPAddress subnet(255, 255, 0, 0);
IPAddress DNS(192, 168, 1, 1);

void setup()
{
 
  Serial.begin(9600);
      // Conversion d'objet en pointeur
  String macId = domo.generateKey();
  IPAddress ip = domo.getIP(macId);
  params = &p;
  

  domo.initWifiStatic(ip, gateway, subnet, DNS);

//  domo.initWifi();
  domo.getIdFromDomoticz(domo.generateKey(), params);

 // modules.readTemperature();
 
   modules.readIntensite();
  printInfo();
  delay(2000);
  //modules.sleep(params->sleepTime);
}

void loop()
{
  modules.readIntensite();
  printInfo();
  delay(30000);
}

void printInfo()
{
  // Domoticz format /json.htm?type=command&param=udevice&idx=IDX&nvalue=0&svalue=TEMP;HUM;HUM_STAT

  Serial.println("Dans printInfo " + params->esp8266_id);

  boolean connected = domo.connect();
  
  if (connected && modules.temp > 0) {
    Serial.println("Dans set temperature");
    String svalue = String(modules.temp) + ";" + String(modules.humidity) + ";0;0;0";
    Serial.println(svalue);
    domo.executeJson("/json.htm?type=command&param=udevice&idx=" + params->esp8266_id, svalue, "0");

    domo._client.stop();

    delay(200);
  }

  connected = domo.connect();
  if (connected && params->esp8266_id_Vcc != "") {
    Serial.print(" Envoi tension ");
    Serial.print(params->esp8266_id_Vcc);
    Serial.print(" ");
    String vcc = domo.readVcc();
    Serial.println(vcc);

    // domo._client.print("GET /json.htm?type=command&param=udevice&idx=");
    domo.executeJson("/json.htm?type=command&param=udevice&idx=" + params->esp8266_id_Vcc, vcc, "0");
    domo._client.stop();
  }

  Serial.print("Intensite ");
  Serial.println(modules.lum);

  connected = domo.connect();
  if (connected && params->esp8266_id_lum != "") {
    Serial.print(" Envoi intensite ");
    Serial.print(params->esp8266_id_lum);
    Serial.print(" ");
    Serial.println(modules.lum);

    // domo._client.print("GET /json.htm?type=command&param=udevice&idx=");
    domo.executeJson("/json.htm?type=command&param=udevice&idx=" + params->esp8266_id_lum, String(modules.lum), "0");
    domo._client.stop();
  }

  Serial.print("Time = ");
  Serial.println(millis());

   delay(200);
}