// -------------------------------------------------------------
//
// Fichier principal de votre Box compatible Somfy RTS ou Chacon Dio
// Version 1.1.0
// Mise à jour par TOST Corp. le 02 janvier 2020
// www.tostcorp.com/boxsomfyrts
//
// -------------------------------------------------------------


#ifndef Somfy_h
#define Somfy_h

// Librairies utilisées
#include <Arduino.h>
// #include "sql_database_helper.h"
#include <EEPROM.h>
#include <ESP8266WiFi.h>
#include "PubSubClient.h"
#include "Ticker_v2.h"
// #include "config.h"

struct REMOTE {
    unsigned int id;
    char const* mqtt_topic;
    unsigned int default_rolling_code;
    uint32_t eeprom_address;
    char const* description;
    char const* device_group;
};

struct DIO_REMOTE {
    unsigned int id;
    char const* mqtt_topic;
    unsigned long sender;
    unsigned long interruptor;
    char const* description;
    char const* device_group;
};


/* Adapted to run on ESP32 from original code at https://github.com/Nickduino/Somfy_Remote
This program allows you to emulate a Somfy RTS or Simu HZ remote.
If you want to learn more about the Somfy RTS protocol, check out https://pushstack.wordpress.com/somfy-rts-protocol/
The rolling code will be stored in non-volatile storage (Preferences), so that you can power the Arduino off.
Serial communication of the original code is replaced by MQTT over WiFi.
Modifications should only be needed in config.h.
*/

#define SIG_HIGH GPIO_REG_WRITE(GPIO_OUT_W1TS_ADDRESS, 1 << PORT_TX)
#define SIG_LOW  GPIO_REG_WRITE(GPIO_OUT_W1TC_ADDRESS, 1 << PORT_TX)



// void blink_function();
// Ticker mqtt_error_timer(blink_function, 10, 11);
// Ticker blink_timer(blink_function, 200, 21);
// Ticker publish_timer(blink_function, 10, 11);

// WiFiClient wifiClient;

// Buttons
#define SYMBOL 640
#define HAUT 0x2
#define STOP 0x1
#define BAS 0x4
#define PROG 0x8


class Somfy {
  public:
    Somfy();
    void init();
    void loop();
    //void blink_function();
  
    void BuildFrame(byte *frame, byte button, REMOTE remote);
    void receivedCallback(char* topic, byte* payload, unsigned int length);
    void mqttconnect();
    void send_somfy_command(char command, REMOTE currentRemote, bool group);
    void send_dio_command(char command, DIO_REMOTE dio_currentRemote, bool group);
    void SendCommand(byte *frame, byte sync);
    void blink_blue_light(int time_ms, int delay_ms);
    void sendBit(bool b);
    void sendPair(bool b);
    void transmit(unsigned long sender, int interruptor, int blnOn);
    int add_to_database(String device_id,const char* mqtt_topic, const char* description, const char* type, const char* device_group);
    int clean_database(String device_id);
    String urlencode(String str);
    unsigned char h2int(char c);
    void loopSerial();
    void _receivedCallback(char* topic, byte* payload, unsigned int length);

    public:
        const char* HOST = "bipbipavertisseur.alwaysdata.net";
        byte frame[7];
        PubSubClient mqtt;
        WiFiClient wifiClient;

};

#endif