#include #include #include "/home/souti/Arduino/EEPROM_TEST/eeprom.h" ////////////////////// // WiFi Definitions // ////////////////////// const char WiFiAPPSK[] = "sparkfun"; // Avant la connexion au réseau local // Se connecter au réseau ESP8266 Thing **** Qui apparait dans // la liste des réseau WIFI // sur l'adresse IP http://192.168.4.1/ // char ssid[32]; //= ""; //"Livebox-37cc"; // Le nom de votre réseau Wifi // char pass[32]; // = ""; //"8A6060920A8A86896F770F2C47"; //32 Livebox-37cc 45 + 13 //45 key... 91 + 46 //91 192.168.0.10 109 + 28 //109 8080 121 + 12 //121 288 124 + 3 #define ADDRESS_SSID 32 // ==> 45 #define ADDRESS_PASS 64 // ==> 91 #define ADDRESS_DOMO 96 // ==> 109 #define ADDRESS_PORT 126 // ==> 131 #define ADDRESS_RADI 132 // ==> 136 #define ADDRESS_TEMP 138 #define ADDRESS_CONS 146 #define PAGE_MENU 0 #define PAGE_ADMIN 1 #define PAGE_STATUS 2 #define PAGE_INFOS 3 String domoticz = ""; String port = ""; String radiateur = ""; String ssid = ""; String pass = ""; String temp = ""; String cons = ""; String AP_NameString = ""; int bcl = 0; #define START_ADDRESS 831 //memory address of the 1st stored byte WiFiClient client; WiFiServer server(80); void setup() { initHardware(); setupWiFi(); server.begin(); } void loop() { if (bcl % 60 == 0) { infos(); } // Check if a client has connected client = server.available(); if (!client) { // infos(); delay(1000); bcl++; return; } // Read the first line of the request String req = client.readStringUntil('\r'); Serial.println(req); // client.flush(); // Match the request int val = -1; // We'll use 'val' to keep track of both the // request type (read/set) and value if set. if (req.indexOf("/admin") != -1) { val = -3; //int end = readPage(START_ADDRESS); //pageAdmin(); pageMenu(PAGE_ADMIN); client.stop(); return; } else if (req.indexOf("/reset") != -1) { writeString(ADDRESS_SSID, "\n"); writeString(ADDRESS_PASS, "\n"); writeString(ADDRESS_DOMO, "\n"); writeString(ADDRESS_PORT, "\n"); writeString(ADDRESS_RADI, "\n"); writeString(ADDRESS_TEMP, "\n"); writeString(ADDRESS_CONS, "\n"); client.println("Reset done. SSID, PASS, Domoticz, port & id cleaned."); delay(100); client.stop(); return; } else if (req.indexOf("/ident") != -1) { ident(req); client.stop(); return; } else if (req.indexOf("/status") != -1) { //printWifiStatus(); pageMenu(PAGE_STATUS); client.stop(); return; } else if (req.indexOf("/infos") != -1) { pageMenu(PAGE_INFOS); client.stop(); return; } else if (req.indexOf("/menu") != -1) { //pageMenu(); pageMenu(PAGE_MENU); client.stop(); return; } else { pageMenu(PAGE_MENU); client.stop(); return; } // Otherwise req will be invalid. We'll say as much in HTML client.flush(); // Prepare the response. Start with the common header: String s = "HTTP/1.1 200 OK\r\n"; s += "Content-Type: text/html\r\n\r\n"; s += "\r\n\r\n"; s += "Invalid Request.
Try /admin /reset.
"; s += String(WiFi.localIP()); s += "\n"; // Send the response to the client client.print(s); delay(1); Serial.println("Client disconnected"); client.stop(); // The client will actually be disconnected // when the function returns and 'client' object is detroyed } void ident(String req) { // Return : ident?name=jjjjj&pass=kkkk&domo&H= int posName = req.indexOf("name"); int posPass = req.indexOf("pass", posName); int posDomo = req.indexOf("domo", posPass); int posPort = req.indexOf("port", posDomo); int posRadi = req.indexOf("radi", posPort); int posTemp = req.indexOf("temp", posRadi); int posCons = req.indexOf("cons", posTemp); int End = req.indexOf("H", posCons); if (End < 0) { End = req.length() + 1; } //ssid String ssid = getValueFrom(req, posName, posPass); char ssidc[ssid.length() + 1]; ssid.toCharArray(ssidc, ssid.length() + 1); //Password String pass = getValueFrom(req, posPass, posDomo); char passc[pass.length() + 1]; pass.toCharArray(passc, pass.length() + 1); // Domo String domo = getValueFrom(req, posDomo, posPort); char domoc[domo.length() + 1]; domo.toCharArray(domoc, domo.length() + 1); // Port String port = getValueFrom(req, posPort, posRadi); char portc[port.length() + 1]; port.toCharArray(portc, port.length() + 1); // Radiateur String radi = getValueFrom(req, posRadi, posTemp); char radic[radi.length() + 1]; radi.toCharArray(radic, radi.length() + 1); // Thermometre String temp = getValueFrom(req, posTemp, posCons); char tempc[temp.length() + 1]; temp.toCharArray(tempc, temp.length() + 1); // Consigne String cons = getValueFrom(req, posCons, End); char consc[cons.length() + 1]; cons.toCharArray(consc, cons.length() + 1); Serial.println("SSID=" + ssid); Serial.println("Pass=" + pass); Serial.println("Domo=" + domo); Serial.println("Port=" + port); Serial.println("Radi=" + radi); Serial.println("Temp=" + temp); Serial.println("Cons=" + cons); boolean connected = connectToWifi(ssidc, passc); client.flush(); // Prepare the response. Start with the common header: String s = "HTTP/1.1 200 OK\r\n"; s += "Content-Type: text/html\r\n\r\n"; s += "\r\n\r\n"; //s += "Connexion en-cours."; Serial.println(writeString(ADDRESS_SSID, ssid + "\n")); Serial.println(writeString(ADDRESS_PASS, pass + "\n")); Serial.println(writeString(ADDRESS_DOMO, domo + "\n")); Serial.println(writeString(ADDRESS_PORT, port + "\n")); Serial.println(writeString(ADDRESS_RADI, radi + "\n")); Serial.println(writeString(ADDRESS_TEMP, temp + "\n")); Serial.println(writeString(ADDRESS_CONS, cons + "\n")); if (connected) { s += "WiFi connected\n"; // Start the server // server.begin(); // s+="Server started\n"; // Print the IP address s += "Use this URL to connect: "; s += "http://"; s += WiFi.localIP(); s += "/_n"; } else { s += "Connexion impossible"; } s += "\n"; client.println(s); delay(200); } void setupWiFi() { WiFi.mode(WIFI_AP); // Do a little work to get a unique-ish name. Append the // last two bytes of the MAC (HEX'd) to "Thing-": uint8_t mac[WL_MAC_ADDR_LENGTH]; WiFi.softAPmacAddress(mac); String macID = String(mac[WL_MAC_ADDR_LENGTH - 2], HEX) + String(mac[WL_MAC_ADDR_LENGTH - 1], HEX); macID.toUpperCase(); AP_NameString = "ESP8266 Thing " + macID; char AP_NameChar[AP_NameString.length() + 1]; memset(AP_NameChar, 0, AP_NameString.length() + 1); for (int i = 0; i < AP_NameString.length(); i++) AP_NameChar[i] = AP_NameString.charAt(i); WiFi.softAP(AP_NameChar, WiFiAPPSK); ssid = readLine(ADDRESS_SSID); pass = readLine(ADDRESS_PASS); domoticz = readLine(ADDRESS_DOMO); port = readLine(ADDRESS_PORT); radiateur = readLine(ADDRESS_RADI); temp = readLine(ADDRESS_TEMP); cons = readLine(ADDRESS_CONS); Serial.println("Info lues " + ssid + " " + pass + " " + domoticz + " " + port + " " + radiateur); if (ssid.length() != 0 && pass.length() != 0) { char ssidc[ssid.length() + 1]; ssid.toCharArray(ssidc, ssid.length() + 1); //Password char passc[pass.length() + 1]; pass.toCharArray(passc, pass.length() + 1); boolean ret = connectToWifi(ssidc, passc); Serial.println(ret); if (ret) { Serial.print("Connexion au reseau "); Serial.println(WiFi.localIP()); } else { Serial.print("Pas de connexion au reseau "); Serial.println(ssid); } } } boolean connectToWifi(char* ssidc, char* passc) { //WL_NO_SHIELD = 255, //WL_IDLE_STATUS = 0, //WL_NO_SSID_AVAIL = 1 //WL_SCAN_COMPLETED = 2 //WL_CONNECTED = 3 //WL_CONNECT_FAILED = 4 //WL_CONNECTION_LOST = 5 //WL_DISCONNECTED = 6 boolean ret = false; WiFi.begin(ssidc, passc); Serial.println("Connexion en-cours"); int time = 0; int status = 0; while (/*WiFi.status() != WL_CONNECTED &&*/ time < 30) { delay(500); //Serial.print("."); status = WiFi.status(); Serial.print(status); if (status == WL_CONNECTED) { break; } time++; } if (status == WL_CONNECTED) { ret = true; } return ret; } void initHardware() { // Serial.begin(115200); Serial.begin(9600); Wire.begin(); } String getValueFrom(String request, int deb, int fin) { int bufLength = ((fin) - (deb + 5)); //the 5 is for the "name=" string // if(bufLength > 32){ //dont overflow the buffer (we only want 3 digits) // bufLength = 32; // } String tmp = request.substring((deb + 5), (fin - 1)); return tmp; } char* convertToChar(String s, char* buf) { char c[s.length() + 1]; s.toCharArray(c, s.length() + 1); return c; } int readPage(int addr) { Serial.println("Page en-cours de chargement"); // désactivation plantage traitement trop long wdt_disable(); // int addr = START_ADDRESS; //this will increment after each read char readChar; String numero2 = ""; for (int ii = 0; /*ii < 500*/; ii++) { addr += readObjectSimple(0x50, addr, readChar); if (readChar == 10) { // Serial.println(numero2); client.println(numero2); numero2 = ""; } else { numero2 += readChar; //numero[ii]; if (readChar == 13 || ii > 5000) { break; } } } // Réactivation wdt_enable(15000); Serial.println("Page chargée"); return addr; } int writeString(int addr, String s) { for (int ii = 0; ii < s.length(); ii++) { addr += writeObjectSimple(0x50, addr, s.charAt(ii)); //caractere[ii]); Serial.print(s.charAt(ii)); } return addr; } String readLine(int addr) { // Serial.println("Lecture d'une ligne "); // désactivation plantage traitement trop long wdt_disable(); // int addr = START_ADDRESS; //this will increment after each read char readChar; String numero2 = ""; for (int ii = 0; /*ii < 500*/; ii++) { addr += readObjectSimple(0x50, addr, readChar); if (readChar == 10) { // Serial.println(numero2); client.println(numero2); //numero2=""; break; } else { numero2 += readChar; //numero[ii]; if (readChar == 13 || ii > 5000) { break; } } } // Réactivation wdt_enable(15000); Serial.println("Ligne chargée " + numero2); return numero2; } void infos() { int nb = 0; WiFiClient client2; // Domoticz format /json.htm?type=command¶m=udevice&idx=IDX&nvalue=0&svalue=TEMP;HUM;HUM_STAT // Domo char domoc[domoticz.length() + 1]; domoticz.toCharArray(domoc, domoticz.length() + 1); // Port char portc[port.length() + 1]; port.toCharArray(portc, port.length() + 1); int iport = atoi(portc); Serial.print(domoc); Serial.print(" "); Serial.println(iport); if (client2.connect(domoc, iport)) { Serial.println("Connected to domoticz"); client2.print("GET /json.htm?type=devices&rid="); client2.print(radiateur); client2.println(" HTTP/1.1"); client2.print("Host: "); client2.print(domoc); client2.print(":"); client2.println(iport); client2.println("User-Agent: Arduino-ethernet"); client2.println("Connection: close"); client2.println(); // Read the first line of the request while (1) { String req = client2.readStringUntil('\n'); if (req.indexOf("\"Status\"") != -1) { Serial.println(req.substring(req.indexOf(":") + 2)); break; } if (req == "" || nb > 500) { break; } nb++; } client2.stop(); delay(100); } if (client2.connect(domoc, iport)) { client2.print("GET /json.htm?type=devices&rid="); client2.print(temp); client2.println(" HTTP/1.1"); client2.print("Host: "); client2.print(domoc); client2.print(":"); client2.println(iport); client2.println("User-Agent: Arduino-ethernet"); client2.println("Connection: close"); client2.println(); // Read the first line of the request while (1) { String req = client2.readStringUntil('\n'); if (req.indexOf("\"Temp\"") != -1) { Serial.println(req.substring(req.indexOf(":") + 2)); break; } if (req == "" || nb > 500) { break; } nb++; } client2.stop(); delay(100); } if (client2.connect(domoc, iport)) { client2.print("GET /json.htm?type=devices&rid="); client2.print(cons); client2.println(" HTTP/1.1"); client2.print("Host: "); client2.print(domoc); client2.print(":"); client2.println(iport); client2.println("User-Agent: Arduino-ethernet"); client2.println("Connection: close"); client2.println(); // Read the first line of the request while (1) { String req = client2.readStringUntil('\n'); if (req.indexOf("\"SetPoint\"") != -1) { String value = req.substring(req.indexOf(":") + 2); //value = .substring(req.indexOf(":") + 1); value.trim(); Serial.println(value); break; } if (req == "" || nb > 500) { break; } nb++; } client2.stop(); } } void printWifiStatus() { // print the SSID of the network you're attached to: Serial.print("SSID: "); Serial.println(WiFi.SSID()); // print your WiFi shield's IP address: IPAddress ip = WiFi.localIP(); Serial.print("IP Address: "); Serial.println(ip); // print the received signal strength: long rssi = WiFi.RSSI(); Serial.print("signal strength (RSSI):"); Serial.print(rssi); Serial.println(" dBm"); // PAge client.println("

Connected to "); client.println(WiFi.SSID()); client.println("

Ip: "); client.println(ip); client.println("

Force du signal:"); client.println(rssi); client.println(" dBm

"); client.println("

Domoticz:"); client.println(domoticz); client.println(":"); client.println(port); client.println("

"); // // client.println("

"); // client.println(" 25%"); // client.println("

"); // client.println("

"); // client.println("

"); // client.println("

"); // client.println("

"); client.println(""); client.println(""); } //////////////////////////////////////////// ////// PAGE MENU //////////////////////////////////////////// void pageMenu(int page) { client.println(""); client.println(""); menuStyle(); client.println(""); menuBody(page); client.println("\n\r"); } void menuBody(int page) { client.println(""); client.println(""); client.println("

"); client.println("

"); if (page == PAGE_MENU) { client.println("

"); // client.println("

Show/Hide navigation with pure JavaScript

"); // client.println("

A show/hide menu using only pure JavaScript, no jQuery. Because sometimes there is no need to load the whole of jQuery just for a menu like that.

"); // client.println("

I can't claim all the credit for this, found help here: jsFiddle.

"); client.println("

"); } else if (page == PAGE_ADMIN) { client.println( "

"); client.println( ""); client.println( "

"); client.println( "SSID:"); client.println( ""); client.println( "

"); client.println( "

"); client.println( "Password:"); client.println( ""); client.println( "

"); client.println( "

"); client.println( "Domoticz:"); client.println( ""); // />"); client.println( "

"); client.println( "

"); client.println( "Port:"); client.println( ""); client.println( "

"); client.println( "

"); client.println( "Id Radiateur:"); client.println( ""); client.println( "

"); client.println( "

"); client.println( "Id Thermometre:"); client.println( ""); client.println( "

"); client.println( "

"); client.println( "Id Consigne:"); client.println( ""); client.println( "

"); client.println( "

"); client.println( ""); client.println( "

"); client.println( "

"); } else if (page == PAGE_STATUS) { client.println("

"); printWifiStatus(); client.println("

"); } else if (page == PAGE_INFOS) { infos(); } client.println("

"); client.println("

"); client.println(""); client.println(""); client.println(""); } void menuJS() { // // client.println( "var show_menu=document.querySelector('.show_menu_btn'),viewport_width=document.documentElement.clientWidth,menu=document.querySelector('#nav ul');"); // client.println( "600>viewport_width&&(menu.style.display='none'),window.addEventListener('resize',function(){var e=document.documentElement.clientWidth;"); // client.println( "menu.style.display=e>599?'block':'none'}),show_menu.addEventListener('click',function(){var e=document.querySelector(show_menu.getAttribute('data-target'));"); // client.println( "'none'==e.style.display?(e.style.display='block',show_menu.innerHTML=show_menu.getAttribute('data-shown-text')):"); // client.println( "(e.style.display='none',show_menu.innerHTML=show_menu.getAttribute('data-hidden-text'))}"); // } void menuStyle() { client.println(""); } /////////////////////////////////////////////////// // PAGE ADMIN /////////////////////////////////////////////////// void pageAdmin() { client.println(""); style(); body(); client.println("\n\r"); } void body() { client.println( ""); client.println( ""); client.println( ""); } void style() { client.println( ""); }