//extern "C" {
//#include "user_interface.h"
//}

// Need for getVcc
ADC_MODE(ADC_VCC);

/////////////////////
// Domoticz Classe
/////////////////////
    
#include "Domoticz.h"

Domoticz domo("192.168.1.3", "81", "Livebox-37cc", "8A6060920A8A86896F770F2C47");
#include "Modules.h"
Modules  modules;
Params   * params;


IPAddress gateway(192, 168, 1, 1);
IPAddress subnet(255, 255, 0, 0);
IPAddress DNS(192, 168, 1, 1);

void setup()
{
//  pinMode(PIN_ALIM_DS, OUTPUT);
//  digitalWrite(PIN_ALIM_DS, HIGH);
  //Wire.begin(SDA, SCL);
  
  Serial.begin(9600);
  //delay(200);
  String macId = domo.generateKey();
  IPAddress ip = domo.getIP(macId);
  
  // Conversion d'objet en pointeur
  Params p;
  params = &p;
  domo.initWifiStatic(ip, gateway, subnet, DNS);
  //domo.initWifi();
  domo.getIdFromDomoticz(macId, params);

  modules.barometre();

  // modules.readLuminosite();

//  digitalWrite(PIN_ALIM_DS,LOW);

  printInfo();

  modules.sleep(params->sleepTime);
  //delay(5000);
}

void loop()
{

}

void printInfo()
{
  // Domoticz format /json.htm?type=command&param=udevice&idx=IDX&nvalue=0&svalue=TEMP;HUM;HUM_STAT;BAR;BAR_FOR

  Serial.println("Dans printInfo " + params->esp8266_id);

  boolean connected = domo.connect();
  
  if (connected && modules.temp > 0 && params->esp8266_id != "" ) {
    Serial.println("Dans set temperature");
    String svalue = String(modules.temp) 
      + ";"   + String(modules.humidity) 
      + ";0;" + String(modules.pression) 
      + ";"   + String(modules.pressionHg);
    Serial.println(svalue);
    domo.executeJson("/json.htm?type=command&param=udevice&idx=" + params->esp8266_id, svalue, "0");

//    delay(200);
//    Serial.println("Response: ");
//
//    domo.readResponse();
    domo._client.stop();

    delay(200);
    
  }

  connected = domo.connect();
  if (connected && params->esp8266_id_Vcc != "") {
    Serial.print(" Envoi tension ");
    Serial.print(params->esp8266_id_Vcc);
    Serial.print(" ");
    String vcc = domo.readVcc();
    Serial.println(vcc);

    // domo._client.print("GET /json.htm?type=command&param=udevice&idx=");
    domo.executeJson("/json.htm?type=command&param=udevice&idx=" + params->esp8266_id_Vcc, vcc, "0");

    domo._client.stop();
  }

//  Serial.print("Luminosite ");
//  Serial.println(modules.lum);
//
//  connected = domo.connect();
//  if (connected && params->esp8266_id_lum != "") {
//    Serial.print(" Envoi luminosite ");
//    Serial.print(params->esp8266_id_lum);
//    Serial.print(" ");
//    Serial.println(modules.lum);
//
//    // domo._client.print("GET /json.htm?type=command&param=udevice&idx=");
//    domo.executeJson("/json.htm?type=command&param=udevice&idx=" + params->esp8266_id_lum, String(modules.lum), "0");
//    domo._client.stop();
//  }

  Serial.print("Time = ");
  Serial.println(millis());

   delay(200);
}