//extern "C" {
//#include "user_interface.h"
//}

// Need for getVcc
ADC_MODE(ADC_VCC);

/////////////////////
// Domoticz Classe
/////////////////////
#include "Domoticz.h"
Domoticz domo("192.168.1.3", "81", "Livebox-37cc", "8A6060920A8A86896F770F2C47");
#include "Modules.h"
Modules  modules;
Params   * params;
#include "ServeurWeb.h"

ServeurWeb * serveurWeb;
 WiFiServer server(80);

#include "Octoprint.h"
Octoprint octoprint("192.168.1.3", "5000", "B5746ACFF37140D0B5F6FEAAC4413B5C");


#include "Files.h"
Files * files;

// Convert image to char array http://www.digole.com/tools/PicturetoC_Hex_converter.php

Params p;
ServeurWeb sw;

// domoticz
String macID    = "";
unsigned long milli;

void setup()
{
  Serial.begin(9600);
  // /* sda scl */
  // Wire.pins(SDA, SCL);
  // Wire.begin(SDA, SCL);

  // Conversion d'objet en pointeur
  params = &p;
  serveurWeb = &sw;
  serveurWeb->domoticz = &domo;
  serveurWeb->modules = &modules;
  serveurWeb->server = &server;
  serveurWeb->server->begin();

  delay(100);
  domo.initWifi();
  macID  = domo.generateKey();
  domo.getIdFromDomoticz(macID, params);

  pinMode(RELAY_PIN, OUTPUT);
  digitalWrite(RELAY_PIN, HIGH);

  // octoprint.connect();
  // octoprint.executeJson("/api/printer", "", "");
  // octoprint.executeJsonPost("/api/printer/command", "{\"command\": \"M503\"}");

  milli = 0; millis();
  delay(100);

  files->init();

  delay(100);

  EEPROM.begin(512); 
}

void loop() 
{ 
  serveurWeb->loop();

 // yield();
 // files->ftpSrv.handleFTP();        //make sure in loop you call handleFTP()!!  
 // yield();

  if (milli == 0 || milli + params->sleepTime * 1000 <= millis() ) {
    // Avoid WDT reset during long process
    yield();
    milli = millis();        
    modules.readTemp();
    printInfo();
    LittleFS.mkdir("/data");

    files->listDir("/");

  // Serial.println("SSID=" + serveurWeb->eeprom->readString(0));
  // Serial.println("Pass=" + serveurWeb->eeprom->readString(20));
  // Serial.println("Domo=" + serveurWeb->eeprom->readString(40));
  // Serial.println("Port=" + serveurWeb->eeprom->readString(60));

   // Test Json
    domo.readTempDayValues(params->esp8266_id);
  }

}

void printInfo()
{

  boolean connected = domo.connect();

  Serial.println("Dans printInfo " + connected + ' ' + params->esp8266_id);
    yield();

  // Domoticz format /json.htm?type=command&param=udevice&idx=IDX&nvalue=0&svalue=TEMP;HUM;HUM_STAT

  if (connected && params->esp8266_id != "") {
    Serial.println("Dans set temperature" + String(modules.temp));
    //domo.executeJson();
    if (modules.temp < 50 && modules.temp > 0) {
      String svalue = String(modules.temp) + ";" + String(modules.humidity) + ";0";

      Serial.println(svalue);
      domo.executeJson("/json.htm?type=command&param=udevice&idx=" + params->esp8266_id, svalue, "0");
      yield();

      domo._client.stop();
      yield();
    }
    delay(200);
  }
  connected = domo.connect();
  if (connected && params->esp8266_id_Vcc != "") {
    Serial.print(" Envoi tension ");
    Serial.print(params->esp8266_id_Vcc);
    Serial.print(" ");
        yield();

    String vcc = domo.readVcc();
    Serial.println(vcc);
       yield();

    // domo._client.print("GET /json.htm?type=command&param=udevice&idx=");
    domo.executeJson("/json.htm?type=command&param=udevice&idx=" + params->esp8266_id_Vcc, vcc, "0");
    domo._client.stop();
        yield();

  }
}