#include #include #include // WIFI const char* ssid = "Livebox-37cc"; // Le nom de votre réseau Wifi const char* password = "8A6060920A8A86896F770F2C47"; const int relay_pin = 13; const int buttonPin = 12; // the number of the pushbutton pin int end_filament = 0; // variable for reading the pushbutton status WiFiServer server(80); #define DEBUG true void setup() { Serial.begin(9600); delay(10); pinMode(relay_pin, OUTPUT); digitalWrite(relay_pin, HIGH); // initialize the pushbutton pin as an input: pinMode(buttonPin, INPUT); // Connect to WiFi network Serial.println(); Serial.println(); Serial.print("Connecting to "); Serial.println(ssid); WiFi.begin(ssid, password); while (WiFi.status() != WL_CONNECTED) { delay(500); Serial.print("."); } Serial.println(""); Serial.println("WiFi connected"); // Start the server server.begin(); Serial.println("Server started"); // Print the IP address Serial.print("Use this URL to connect: "); Serial.print("http://"); Serial.print(WiFi.localIP()); Serial.println("/"); Wire.begin(4, 5); } void loop() { // read the state of the pushbutton value: end_filament = digitalRead(buttonPin); // // check if the pushbutton is pressed. If it is, the end_filament is HIGH: // if (end_filament == HIGH) { // // turn LED on: // digitalWrite(ledPin, HIGH); // } else { // // turn LED off: // digitalWrite(ledPin, LOW); // } // Check if a client has connected WiFiClient client = server.available(); if (!client) { return; } // Wait until the client sends some data Serial.println("new client"); while(!client.available()){ delay(1); } // Read the first line of the request String request = client.readStringUntil('\r'); Serial.println(request); client.flush(); // Match the request int value = LOW; if (request.indexOf("/LED=ON") != -1) { digitalWrite(relay_pin, HIGH); value = HIGH; } if (request.indexOf("/LED=OFF") != -1) { digitalWrite(relay_pin, LOW); value = LOW; } // Set relay_pin according to the request //digitalWrite(relay_pin, value); // Return the response client.println("HTTP/1.1 200 OK"); client.println("Content-Type: text/html"); client.println(""); // do not forget this one client.println(""); client.println(""); client.print("Led pin is now: "); if(value == HIGH) { client.print("On"); } else { client.print("Off"); } ///////////////////////////// // //////////////////////////// digitalWrite(2, HIGH); // turn the LED on (HIGH is the voltage level) delay(10); // wait for a second digitalWrite(2, LOW); #ifdef DEBUG Serial.print("Send"); #endif client.println(""); client.println(""); client.println(""); client.print(""); client.println("
Click here turn the LED on pin 2 ON
Click here turn the LED on pin 2 OFF
"); client.print(end_filament); client.println("
"); delay(1); Serial.println("Client disconnected"); Serial.println(""); }