#include <RCSwitch.h>
#include <Narcoleptic.h>
#include <Wire.h>


#define SEND_MESSAGE_DELAY 3000 // Ne pas dépasser 32000 !! Delay in ms between each value's extraction
#define SEND_433_PAUSE 160 // 16 multiple

#define DEBUG true

const unsigned long activation = 111269; // Radiateur
const unsigned long idRad=331969;
const unsigned long desactivation = 962111; // Fin radiateur
const unsigned int delai = 11;

const unsigned long TIME = 512;
const unsigned long TWOTIME = TIME*2;

const int analogIn = A0;
int mVperAmp = 185; // 185 pour 5A, use 100 for 20A Module and 66 for 30A Module
int RawValue= 0;
int ACSoffset = 2500; 
double Voltage = 0;
double Amps = 0;

RCSwitch mySwitch = RCSwitch();

void setup() {
  #ifdef DEBUG   
  Serial.begin(9600);
  Serial.println("\n[Oregon V2.1 encoder]");
  #endif
  
  pinMode(13, OUTPUT);
  
  mySwitch.enableTransmit(9);  
}


void loop() {
  enableADC();
  delay(100);
  digitalWrite(13, HIGH);   // turn the LED on (HIGH is the voltage level)
  delay(10);              // wait for a second
  digitalWrite(13, LOW);
  
  long vcc = readVcc();
  
  #ifdef DEBUG  
  Serial.print("Send vcc=");
  Serial.println(vcc);
  #endif

  mySwitch.send(activation, 24);  
  delay(delai); //delayMicroseconds
  
   double amp = getAmp();
  myMessageSend(idRad,(220.0 * amp));
  
  
  mySwitch.send(desactivation, 24);
  delay(delai);
  
  delayMicroseconds(TWOTIME*8);
  
  disableADC();
  Narcoleptic.delay(SEND_MESSAGE_DELAY);
  Narcoleptic.delay(SEND_MESSAGE_DELAY);
}


void myMessageSend(long id, long value) {
  
    #ifdef DEBUG  
  Serial.print("Send id="); Serial.print(id);
  Serial.print(" value="); Serial.println(value);
  #endif
  
  mySwitch.send(id, 24); //"000000000001010100010001");
  delay(delai);
  mySwitch.send(value, 24); //"000000000001010100010001");
  delay(delai);

  //delay(5000);
  //delayMicroseconds(TWOTIME*8);
}

void enableADC() {
  //bitClear(PRR, PRADC); ADCSRA |= bit(ADEN); // Enable the ADC
   delay(2); // Wait for Vref to settle
  while (bit_is_set(ADCSRA,ADSC));
}

void disableADC() {
  //ADCSRA &= ~ bit(ADEN); bitSet(PRR, PRADC); // Disable the ADC to save power
  //while (bit_is_set(ADCSRA,ADSC));
   delay(2); // Wait for Vref to settle
}
//--------------------------------------------------------------------------------------------------
// Read current supply voltage
//--------------------------------------------------------------------------------------------------
 long readVcc() {
   bitClear(PRR, PRADC); ADCSRA |= bit(ADEN); // Enable the ADC
   long result;
   // Read 1.1V reference against Vcc
   #if defined (__AVR_ATtiny24__) || defined(__AVR_ATtiny44__) || defined(__AVR_ATtiny84__)
    ADMUX = _BV(MUX5) | _BV(MUX0); // For ATtiny84
   #elif defined (__AVR_ATtiny25__) || defined(__AVR_ATtiny45__) || defined(__AVR_ATtiny85__)
    ADMUX = _BV(MUX3) | _BV(MUX2);
   #else
    ADMUX = _BV(REFS0) | _BV(MUX3) | _BV(MUX2) | _BV(MUX1);  // For ATmega328
   #endif
   // ADCSRB = 0;
   
   delay(2); // Wait for Vref to settle
   ADCSRA |= _BV(ADSC); // Convert
   while (bit_is_set(ADCSRA,ADSC));
   result = ADCL;
   result |= ADCH<<8;
   result = 1126400L / result; // Back-calculate Vcc in mV
 //  ADCSRA &= ~ bit(ADEN); bitSet(PRR, PRADC); // Disable the ADC to save power
   
   // analogReference(DEFAULT);
    
   return result; // Vcc in millivolts
} 
double getAmp() {
 int i = 0;
 RawValue = 0;
 // Somme du courant alternatif pendant 20 ms ==> 50hz
 // Détermination du max et max pour hauteur de crete
 int vmin = 1024;
 int vmax = 0;
 for (i = 0; i < 20; i++) {
   int value = analogRead(analogIn);
   if (value >= 0) {
   RawValue += value;
   vmax = max(value,vmax);
   vmin = min(value,vmin);
   } else {
     i--;
   }
   delay(1); 
   
 }

#ifdef DEBUG  
 Serial.print("min = " ); 
 Serial.print(vmin);
 Serial.print(" max = " ); 
 Serial.print(vmax);
#endif
 
 
 // La valeur maxi * racine carrée de 2 pour obtenir la tension "réelle"
 // La tension efficace pour l'effet Hall étant réduite d'un facteur 0,707
 Voltage = ((vmax - vmin) / 430.0) * 5000;
 
 Amps = 5.5 * (vmax - vmin) / 473.0;
 
 
// Serial.print(" Raw Value = " ); // shows pre-scaled value 
// Serial.print(RawValue); 
#ifdef DEBUG  

 Serial.print("\t mV = "); // shows the voltage measured 
 Serial.print(Voltage,3); // the '3' after voltage allows you to display 3 digits after decimal point
 Serial.print("\t Amps = "); // shows the voltage measured 
 Serial.println(Amps,3); // the '3' after voltage allows you to display 3 digits after decimal point
#endif

 return Amps;
 
}