/*
  Blink
  Turns on an LED on for one second, then off for one second, repeatedly.

  Most Arduinos have an on-board LED you can control. On the Uno and
  Leonardo, it is attached to digital pin 11. If you're unsure what
  pin the on-board LED is connected to on your Arduino model, check
  the documentation at http://arduino.cc

  This example code is in the public domain.

  modified 8 May 2014
  by Scott Fitzgerald
 */
 #include <RCSwitch.h>
 
 boolean started = false;
 int id = 0;

RCSwitch mySwitch = RCSwitch();


// Cas
// 12 = Courant général 0 éteint 1 allumé
// 11 = Mode radiateur 0 hors gel 1 confort



// the setup function runs once when you press reset or power the board
void setup() {
  // initialize digital pin 11 as an output.
  pinMode(11, OUTPUT);
  pinMode(12, OUTPUT);
  digitalWrite(11, HIGH); 
  digitalWrite(12, HIGH); 
  Serial.begin(9600);
  mySwitch.enableReceive(0);  // Receiver on inerrupt 0 => that is pin #2
}

void loop() {
  if (mySwitch.available()) {
  
    int value = mySwitch.getReceivedValue();
    
    if (value == 0) {
      Serial.print("Unknown encoding");
    } else {
      long data = mySwitch.getReceivedValue();
      //Serial.print("Received ");
      //Serial.print( data );
//      Serial.print(" / ");
//      Serial.print( mySwitch.getReceivedBitlength() );
//      Serial.print("bit ");
//      Serial.print("Protocol: ");
//      Serial.println( mySwitch.getReceivedProtocol() );
     //Serial.println("");
        //delay(1000);              // wait for a second
        
        if (data == 111269) {
          started = true;
         // id = 0;
          //Serial.println("started");
        } else if (data == 962111) {
          started = false;
          id = 0;
          //Serial.println("Arret");
        } else if (data == 1969 || data == 2069 || data == 2169 || data == 2269) {
          //Serial.print("id=");
          //Serial.println(data);
          // if (id == 0) {
          id = data;
//          } else {
//            started = false;
//            id = 0;
//          }
        } else {
          
          if (started && id == 1969) {
            Serial.print("Demarré ");
            Serial.print("id=");
            Serial.print(id);
            Serial.print(" data=");
            Serial.println(data);
          //       
            if (data >= 1800) {
              digitalWrite(11, HIGH); 
              digitalWrite(12, HIGH); 
              Serial.println("HIGH");
            //  delay(2000);
            } else if (data > 1200) {
              digitalWrite(11, LOW); 
              digitalWrite(12, LOW);    
              Serial.println("LOW");
              //delay(2000);     
            }
          }
        }
    }

    mySwitch.resetAvailable();
  }
}