#ifdef PIN_REGULATION

void setReg(int speed_to_set)
{
  current_regulation = speed_to_set;
  if (current_regulation > 100) current_regulation = 100;
  if (current_regulation <= 1) {
    current_regulation = 0;
  }

  Serial.println(current_regulation);

  analogWrite(PIN_REGULATION, current_regulation * 2.55);// send current_regulation value to motor

  blink(); server.sendHeader("Location", "/?message='Régulation modifiée'");
  server.send(302, "text/plain", "Redirection vers la page principale");

}


void exact_reg() {
  int value_to_set = getParamFromGet("value").toInt();

  current_regulation = value_to_set;
  if (current_regulation > 100) current_regulation = 100;
  if (current_regulation < 0) {
    current_regulation = 0;
  }

  setReg(current_regulation);

}
void plus_reg() {
  int value_to_set = getParamFromGet("value").toInt();
  if (value_to_set <= 0) {
    value_to_set = 5;
  }
  current_regulation += value_to_set;
  setReg(current_regulation);

}

void minus_reg() {
  int value_to_set = getParamFromGet("value").toInt();
  if (value_to_set <= 0) {
    value_to_set = 5;
  }
  current_regulation -= value_to_set;
  setReg(current_regulation);
}

void stop_reg() {
  current_regulation = 0;
  setReg(current_regulation);
}
#endif