/**
   An example showing how to put ESP8266 into Deep-sleep mode
*/

#include <ESP8266WiFi.h>
#include <ESP8266HTTPClient.h>
//#include <Losant.h>

// WiFi credentials.
const char* WIFI_SSID = "Livebox-37cc";
const char* WIFI_PASS = "8A6060920A8A86896F770F2C47";

WiFiClientSecure wifiClient;

void connect() {

  // Connect to Wifi.
  Serial.println();
  Serial.println();
  Serial.print("Connecting to ");
  Serial.println(WIFI_SSID);

  WiFi.begin(WIFI_SSID, WIFI_PASS);

  // WiFi fix: https://github.com/esp8266/Arduino/issues/2186
  WiFi.persistent(false);
  WiFi.mode(WIFI_OFF);
  WiFi.mode(WIFI_STA);
  WiFi.begin(WIFI_SSID, WIFI_PASS);

  unsigned long wifiConnectStart = millis();

  while (WiFi.status() != WL_CONNECTED) {
    // Check to see if
    if (WiFi.status() == WL_CONNECT_FAILED) {
      Serial.println("Failed to connect to WiFi. Please verify credentials: ");
      delay(10000);
    }

    delay(500);
    Serial.println("...");
    // Only try for 5 seconds.
    if (millis() - wifiConnectStart > 15000) {
      Serial.println("Failed to connect to WiFi");
      return;
    }
  }

  Serial.println("");
  Serial.println("WiFi connected");
  Serial.println("IP address: ");
  Serial.println(WiFi.localIP());

  Serial.println();
  Serial.print("Connecting to Losant...");

  Serial.print("Authenticating Device...");
  HTTPClient http;
  http.begin("http://api.losant.com/auth/device");
  http.addHeader("Content-Type", "application/json");
  http.addHeader("Accept", "application/json");

  /* Create JSON payload to sent to Losant
       {
         "deviceId": "575ecf887ae143cd83dc4aa2",
         "key": "this_would_be_the_key",
         "secret": "this_would_be_the_secret"
       }
  */

  String buffer;
  int httpCode = http.POST(buffer);

  if (httpCode > 0) {
    if (httpCode == HTTP_CODE_OK) {
      Serial.println("This device is authorized!");
    } else {
      Serial.println("Failed to authorize device to Losant.");
      if (httpCode == 400) {
        Serial.println("Validation error: The device ID, access key, or access secret is not in the proper format.");
      } else if (httpCode == 401) {
        Serial.println("Invalid credentials to Losant: Please double-check the device ID, access key, and access secret.");
      } else {
        Serial.println("Unknown response from API");
      }
      return;
    }
  } else {
    Serial.println("Failed to connect to Losant API.");
    return;
  }

  http.end();

  Serial.println("Connected!");
  Serial.println("This device is now ready for use!");
}

void setup() {
  Serial.begin(9600);
  Serial.setTimeout(2000);

  // Wait for serial to initialize.
  while (!Serial) { }

  Serial.println("Device Started");
  Serial.println("-------------------------------------");
  Serial.println("Running Deep Sleep Firmware!");
  Serial.println("-------------------------------------");

  connect();

  int temp = analogRead(A0);

  double degreesC = (((temp / 1024.0) * 3.2) - 0.5) * 100.0;
  double degreesF = degreesC * 1.8 + 32;

  Serial.println();
  Serial.print("Temperature C: ");
  Serial.println(degreesC);
  Serial.print("Temperature F: ");
  Serial.println(degreesF);
  Serial.println();
  Serial.println("Going into deep sleep for 20 seconds");
  ESP.deepSleep(20e6); // 20e6 is 20 microseconds
}

void loop() {
}