//Analog Clock Sketch created by Embedded Downloads LTD
//To view the full tutorial go to www.embeddeddownloads.com
#include <Adafruit_GFX_AS.h>    // Core graphics library
#include <Adafruit_ILI9341_8bit_AS.h>// Hardware-specific library
#include <TouchScreen.h>

// The control pins for the LCD can be assigned to any digital or
// analog pins...but we'll use the analog pins as this allows us to
// double up the pins with the touch screen (see the tft paint example).
#define LCD_CS A3 // Chip Select goes to Analog 3
#define LCD_CD A2 // Command/Data goes to Analog 2
#define LCD_WR A1 // LCD Write goes to Analog 1
#define LCD_RD A0 // LCD Read goes to Analog 0

#define LCD_RESET A4 // Can alternately just connect to Arduino's reset pin

// When using the BREAKOUT BOARD only, use these 8 data lines to the LCD:
// For the Arduino Uno, Duemilanove, Diecimila, etc.:
//   D0 connects to digital pin 8  (Notice these are
//   D1 connects to digital pin 9   NOT in order!)
//   D2 connects to digital pin 2
//   D3 connects to digital pin 3
//   D4 connects to digital pin 4
//   D5 connects to digital pin 5
//   D6 connects to digital pin 6
//   D7 connects to digital pin 7
// For the Arduino Mega, use digital pins 22 through 29
// (on the 2-row header at the end of the board).

// These are the pins for the shield!
#define YP A1  // must be an analog pin, use "An" notation!
#define XM A2  // must be an analog pin, use "An" notation!
#define YM 7   // can be a digital pin
#define XP 6   // can be a digital pin

#define MINPRESSURE 10
#define MAXPRESSURE 1000

// For better pressure precision, we need to know the resistance
// between X+ and X- Use any multimeter to read it
// For the one we're using, its 300 ohms across the X plate
TouchScreen ts = TouchScreen(XP, YP, XM, YM, 300);

// Assign human-readable names to some common 16-bit color values:
#define	BLACK   0x0000
#define	BLUE    0x001F
#define	RED     0xF800
#define	GREEN   0x07E0
#define CYAN    0x07FF
#define MAGENTA 0xF81F
#define YELLOW  0xFFE0
#define WHITE   0xFFFF

Adafruit_ILI9341_8bit_AS tft(LCD_CS, LCD_CD, LCD_WR, LCD_RD, LCD_RESET);

int x = 0;
int y = 0;

void setup() {
  Serial.begin(9600);
  tft.reset();
  delay(10);
  tft.begin(0x9341);
  uint16_t identifier = tft.readID(); 
  
  Serial.println(identifier, HEX);
   tft.fillScreen(BLACK);
   
     Serial.println("tft LCD test");
  Serial.print("tft size is ");
  Serial.print(tft.width());
  Serial.print("x");
  Serial.println(tft.height());
  
  tft.fillCircle(120, 160, 10, BLUE);
}
 
void loop(void) {
  int           x1, y1, x2, y2,
                w = tft.width(),
                h = tft.height();
//  // a point object holds x y and z coordinates
//  TSPoint p = ts.getPoint();
//  
//  // we have some minimum pressure we consider 'valid'
//  // pressure of 0 means no pressing!
//  if (p.z > MINPRESSURE && p.z < MAXPRESSURE) {
//    
//    
//     Serial.print("X = "); Serial.print(p.x);
//     Serial.print("\tY = "); Serial.print(p.y);
//     Serial.print("\tPressure = "); Serial.println(p.z);
//     
//   tft.reset();   
//  delay(10);
//  tft.begin(0x9341);  
//  tft.fillScreen(BLACK);
////    
////    
//    tft.fillCircle(50, 50, 10, RED);
//  }

  
  delay(100);
  
  //tft.begin(0x9341);
     testCircles(10, BLUE);
     
  
}
unsigned long testCircles(uint8_t radius, uint16_t color) {
  unsigned long start;
  int           x, y, r2 = radius * 2,
                w = tft.width()  + radius,
                h = tft.height() + radius;

  // Screen is not cleared for this one -- this is
  // intentional and does not affect the reported time.
  start = micros();
  tft.fillScreen(BLACK);
  for(x=0; x<w; x+=r2) {
    for(y=0; y<h; y+=r2) {
      // tft.fillScreen(BLACK);
      tft.drawCircle(x, y, radius, color);
    }
  }
  delay(1000);
  tft.fillRect(0,11,140,11,WHITE);
    tft.fillRect(0,43,140,11,WHITE);
    tft.fillRect(0,59,140,11,WHITE);
    tft.fillRect(0,75,140,11,WHITE);
    tft.fillRect(0,107,140,11,WHITE);
    tft.fillRect(0,123,140,11,WHITE);
    tft.fillRect(0,155,140,11,WHITE);
    tft.fillRect(0,171,140,11,WHITE);
    tft.fillRect(0,187,140,11,WHITE);
    tft.fillRect(0,219,140,11,WHITE);
    tft.fillRect(0,235,140,11,WHITE);
    tft.fillRect(0,267,140,11,WHITE);
    tft.fillRect(0,283,140,11,WHITE);
    tft.fillRect(0,299,140,11,WHITE);
delay(1000);
  return micros() - start;
}