#include <RCSwitch.h>
#include <Narcoleptic.h>
#include <Adafruit_BMP085.h>
#include <Wire.h>


#define SEND_MESSAGE_DELAY 10000 // Ne pas dépasser 32000 !! Delay in ms between each value's extraction
#define SEND_433_PAUSE 160 // 16 multiple

const unsigned long activation = 111269;
const unsigned long id=1969;
const unsigned long id2=2069;
const unsigned long id3=2169;
const unsigned long id4=2269;
const unsigned long desactivation = 962111;
const unsigned int delai = 10;

const unsigned long TIME = 512;
const unsigned long TWOTIME = TIME*2;

// ################# Barometre ####
Adafruit_BMP085 bmp;
// #####################

float temperature = 0.0;
float pressure    = 0.0;
float pression    = 0.0;
float presiune = 0.0;


RCSwitch mySwitch = RCSwitch();

void setup() {
  Serial.begin(9600);
  mySwitch.enableTransmit(9);  
  //mySwitch.setRepeatTransmit();
}

// Prise Eléctrique 
//ON 1 1381719 1398103 
//ON 2 1394007 
//ON 3 1397079 1398103
//
//OFF 1 1381716 
//OFF 2 1398103
//OFF 3 1397076

void loop() {
  long vcc = readVcc();
  //barometre();
  
 Serial.println("Send");
  Serial.print(vcc);
  
  myMessageSend(id,temperature * 100);
  myMessageSend(id2,pressure * 10);
  myMessageSend(id3,pression * 10);
  
  // LUX 
  // R=K*L^-gamma
  // R étant la résistance pour un niveau d'éclairement L.
   int lum = analogRead(1);
  myMessageSend(id4,(1000.0 * lum / 1024.0));
  
  
//  mySwitch.send(activation, 24);  
//  (delai); //delayMicroseconds
//  mySwitch.send(id, 24); //"000000000001010100010001");
//  delay(delai);
//  mySwitch.send(vcc, 24); //"000000000001010100010001");
//  delay(delai);
//  mySwitch.send(desactivation, 24);
//  delay(delai);
  //delay(5000);
  // delayMicroseconds(TWOTIME*8);
    Narcoleptic.delay(SEND_MESSAGE_DELAY);
  Narcoleptic.delay(SEND_MESSAGE_DELAY);
}
void barometre() {
  /* See Example: TypeA_WithDIPSwitches */
//  mySwitch.switchOn("00001", "10000");
//  delay(1000);
    // BMP
   if (bmp.begin()) {  
      temperature = bmp.readTemperature();  
      pressure= bmp.readPressure() / 100.0;
      pression = pressure / 101.325;
      pression = pression * 0.760 * 100;
        // http://en.wikipedia.org/wiki/Atmospheric_pressure#Mean_sea_level_pressure
      //  Serial.print("Presiure la nivelul marii (calculata) = ");
      presiune = bmp.readSealevelPressure(19) / 101.325;
      presiune = presiune * 0.760;
      
      Serial.print("Temperature="); Serial.println(temperature);
      Serial.print("pressure="); Serial.println(pressure);
      Serial.print("pression="); Serial.println(pression);
   }
}  

void myMessageSend(long id, long value) {
  mySwitch.send(activation, 24);  
  (delai); //delayMicroseconds
  mySwitch.send(id, 24); //"000000000001010100010001");
  delay(delai);
  mySwitch.send(value, 24); //"000000000001010100010001");
  delay(delai);
  mySwitch.send(desactivation, 24);
  delay(delai);
  //delay(5000);
  delayMicroseconds(TWOTIME*8);
}
//--------------------------------------------------------------------------------------------------
// Read current supply voltage
//--------------------------------------------------------------------------------------------------
 long readVcc() {
   bitClear(PRR, PRADC); ADCSRA |= bit(ADEN); // Enable the ADC
   long result;
   // Read 1.1V reference against Vcc
   #if defined (__AVR_ATtiny24__) || defined(__AVR_ATtiny44__) || defined(__AVR_ATtiny84__)
    ADMUX = _BV(MUX5) | _BV(MUX0); // For ATtiny84
   #elif defined (__AVR_ATtiny25__) || defined(__AVR_ATtiny45__) || defined(__AVR_ATtiny85__)
    ADMUX = _BV(MUX3) | _BV(MUX2);
   #else
    ADMUX = _BV(REFS0) | _BV(MUX3) | _BV(MUX2) | _BV(MUX1);  // For ATmega328
   #endif
   // ADCSRB = 0;
   
   delay(2); // Wait for Vref to settle
   ADCSRA |= _BV(ADSC); // Convert
   while (bit_is_set(ADCSRA,ADSC));
   result = ADCL;
   result |= ADCH<<8;
   result = 1126400L / result; // Back-calculate Vcc in mV
   // ADCSRA &= ~ bit(ADEN); bitSet(PRR, PRADC); // Disable the ADC to save power
   
   // analogReference(DEFAULT);
    
   return result; // Vcc in millivolts
}