// vi:ts=4
// ----------------------------------------------------------------------------
// Serial2LCD - simple demonstration printing characters from serial port
// Created by Bill Perry 2020-06-28
// bperrybap@opensource.billsworld.billandterrie.com
//
// This example code is unlicensed and is released into the public domain
// ----------------------------------------------------------------------------
//
// This sketch is for LCDs with PCF8574 or MCP23008 chip based backpacks
//
// Sketch demonstrates hd44780 how to read a message of characters from 
// serial port and display it on the LCD.
// It takes advantage of the hd44780 library automatic line
// wrapping capability.
// See the LineWrap sketch for details about line wrapping.
//
// WARNING:
//	Use caution when using 3v only processors like arm and ESP8266 processors
//	when interfacing with 5v modules as not doing proper level shifting or
//	incorrectly hooking things up can damage the processor.
// 
// Configure LCD_COLS, LCD_ROWS and BAUDRATE if desired/needed
// Expected behavior of the sketch:
// - characters received from serial port are displayed on LCD
// - CR and LF are ignored/dropped
//
// If initialization of the LCD fails and the arduino supports a built in LED,
// the sketch will simply blink the built in LED with the initalization error
// code.
//
// NOTE:
//	If the sketch fails to produce the expected results, or blinks the LED,
//	run the included I2CexpDiag sketch to test the i2c signals and the LCD.
//
// Some 16x1 displays are actually a 8x2 display that have both lines on
// a single line on the display.
// If you have one of these displays, simply set the geometry to 8x2 instead
// of 16x1. 

// include the needed headers.
#include <Wire.h>
#include <hd44780.h>						// main hd44780 header
#include <hd44780ioClass/hd44780_I2Cexp.h>	// i2c expander i/o class header

hd44780_I2Cexp lcd; // declare lcd object: auto locate & config exapander chip

// LCD geometry
// while 16x2 will work on most displays even if the geometry is different,
// for actual wrap testing of a particular LCD it is best to use the correct
// geometry.
const int LCD_COLS = 16;
const int LCD_ROWS = 2;

const int BAUDRATE = 9600;

void setup()
{
int status;

	// initalize Serial port
	Serial.begin(BAUDRATE);

	// initialize LCD with number of columns and rows: 
	// hd44780 returns a status from begin() that can be used
	// to determine if initalization failed.
	// the actual status codes are defined in <hd44780.h>
	status = lcd.begin(LCD_COLS, LCD_ROWS);
	if(status) // non zero status means it was unsuccesful
	{
		// begin() failed

		Serial.print("LCD initalization failed: ");
		Serial.println(status);

		// blink error code using the onboard LED if possible
		hd44780::fatalError(status); // does not return
	}

	// turn on automatic line wrapping
	// which automatically wraps lines to the next lower line and wraps back
	// to the top when at the bottom line
	// NOTE: 
	// noLineWrap() can be used to disable automatic line wrapping.
	// _write() can be called instead of write() to send data bytes
	// to the display bypassing any special character or line wrap processing.
	lcd.lineWrap();

	lcd.print("Serial2LCD"); 
	if(LCD_ROWS > 1)
	{
		lcd.setCursor(0,1);
		lcd.print("Baud:");
		lcd.print(BAUDRATE);
	}
}

void loop()
{

	// check to see if characters available
	// indicating a message is coming in
	if (Serial.available())
	{
		// wait some time for rest of message to arrive
		delay(100);

		// Clear the display before showing the new message
    	lcd.clear();

		// print the message on the LCD
		while (Serial.available() > 0)
		{
		char c;
			c = Serial.read();
			if(c != '\r' && c != '\n') // drop CR and LF characters
				lcd.write(c);
		}
    }
}