Arduino/ATMEGA_SOLAIRE_WIFI_WATTMETRE/ATMEGA_SOLAIRE_WIFI_WATTMETRE.ino

// ------------------------------
// LED
// ------------------------------
const byte LED_PIN = 13;

#define DEBUG TRUE
// ------------------------------
// Energie
// ------------------------------
#include "EmonLib.h"                   // Include Emon Library
EnergyMonitor emon1;                   // Create an instance

int boucle = 0;

#include <SoftwareSerial.h>
SoftwareSerial ESPserial(9, 8); // RX | TX

// ----------------
// PZEM for arduino
// -----------------
#include <PZEM004Tv30.h>
PZEM004Tv30 pzem(11, 12);

// ----------------------------
// Dimmer
// ----------------------------
#include <RBDdimmer.h>
#define outputPin  6
#define zerocross  D2 // for boards with CHANGEBLE input pins
#define pas         5
dimmerLamp dimmer(outputPin); //initialase port for dimmer for ESP8266, ESP32, Arduino due boards
// To set dimmer off ==>   dimmer.setPower(128);
// value 0 = On

// ----------------------------
// Interruption
// ----------------------------
const byte interruptPin = 3;
//volatile byte backlight_status = LOW;

// ----------------------------
// Screen LCD
// ----------------------------
#include <LiquidCrystal_I2C.h>
#include "LowPower.h"

#define I2C_SLAVE_ADDRESS 0x0B // 12 pour l'esclave 2 et ainsi de suite
#define PAYLOAD_SIZE 2

LiquidCrystal_I2C lcd(0x27, 16, 2); // set the LCD address to 0x27 for a 16 chars and 2 line display

/******************************************************************/
/******************************************************************/
/******************************************************************/

#define SolaireProduction "1087"
#define Consommation_Apparente "1123"
#define CONSOMMATION_GENERALE "1115"


void setup()
{
  lcd.init();                      // initialize the lcd
  delay(200);
  lcd.noBacklight();
  lcd.setCursor(0, 0);
  lcd.print("Screen Ok");
  Serial.begin(9600);
  ESPserial.begin(9600);

  // Screen
  Serial.println("Screen init...");
  delay(1000);

  pinMode(LED_PIN, OUTPUT);
  pinMode(interruptPin, INPUT);

  lcd.clear();
  lcd.setCursor(0, 0);
  lcd.print("Serial communication & wifi");
  emon1.voltage(A1, 320 , 2.6);  // Voltage: input pin, calibration, phase_shift
  emon1.current(A2, 30);       // Current: input pin, calibration.
  delay(1000);

  // Dimmer
  Serial.println("Dimmer Program is starting...");
  delay(1000);
  dimmer.begin(NORMAL_MODE, ON); //dimmer initialisation: name.begin(MODE, STATE)
  Serial.println("Set value");
  dimmer.setPower(50); // setPower(0-100%);
  lcd.clear();
  lcd.setCursor(0, 0);
  lcd.print("Dimmer set to 0");
  delay(1000);

  lcd.print("-------PZEM-----------"); // Start Print Test to Line 2
  pzem.resetEnergy();
  delay(1000);
  digitalWrite(interruptPin, LOW);
}

void loop()
{

  //  if (digitalRead(interruptPin) == HIGH) {
  //    lcd.backlight();
  //  }
  //  else {
  //    lcd.noBacklight();
  //  }
  double Irms[2];
  boucle ++;

  emon1.calcVI(20, 200);                     // 1 Demande a Emonlib de tout calculer,  (puissance relle, volts moyen, ampère moyen et facteur de puissance)
  // Irms[0] = emon1.calcIrms(5440) * 230; //emon1.apparentPower);
  Irms[0] = emon1.apparentPower;
  float verif_voltage    = emon1.Vrms;        // 1 creation de la variable "volts moyen" (mesurable avec un voltmètre pour l'etalonnage)
  float verif_ampere     = emon1.Irms;        // 1 creation de la variable "Ampères Moyen" (mesurable avec une pince ampèremétrique pour l'etalonnage))
  float Cos_phi          = emon1.powerFactor;

  Serial.print(verif_voltage);
  Serial.print(" V  ");
  Serial.print(verif_ampere);
  Serial.print(" A ");
  Serial.print(emon1.realPower);
  Serial.print(" Wr ");
  Serial.print(emon1.apparentPower);  // Calculate Irms only
  Serial.print(" Wcap ");
  Serial.print(Irms[0]);  // Calculate Irms only
  Serial.print(" Wc ");
  if (boucle < 10) {
    lcd.clear();
    lcd.setCursor(0, 0);
    lcd.print("Calibration :" + String(boucle));
    delay (500);
  }
  else {
    double value = pzemRead();

    ESPserial.print(getJson(String(SolaireProduction), value));
    delay(500);
    Serial.print(value);  // Calculate Irms only
    Serial.print(" Wr ");

    ESPserial.print(getJson(String(Consommation_Apparente), emon1.realPower));
    delay(500);

    ESPserial.print(getJson(String(CONSOMMATION_GENERALE), emon1.apparentPower));

    if (boucle % 2 == 0) {
      lcd.clear();

      lcd.setCursor(0, 0);
      lcd.print("Cso:" + String(emon1.apparentPower, 0) + " R " + String(emon1.realPower, 0));
      lcd.setCursor(0, 1);
      lcd.print("Sol:" + String(value, 0) + " V " + String(emon1.Vrms, 1));
    }
    delay (2000);

    if (boucle > 1000) {
      boucle = 11;
    }
  }

  while ( ESPserial.available()) {
    Serial.write( ESPserial.read() );
  }
  Serial.println();
}

double pzemRead() {
  lcd.setCursor(0, 0);
  double voltage = pzem.voltage();
  double current = pzem.current();
  double pf = pzem.pf();
  double power = pzem.power();
  double energy = pzem.energy();
  double frequency = pzem.frequency();
  //  if ( !isnan(voltage) ) {
  //    Serial.print("Voltage: "); Serial.print(voltage); Serial.println("V");
  //    //lcd.print(String(voltage,1) + " V ");
  //
  //  } else {
  //    Serial.println("Error reading voltage");
  //  }

  //  if ( !isnan(current) ) {
  //    Serial.print("Current: "); Serial.print(current); Serial.println("A");
  //    // lcd.print(String(current,1) + "A ");
  //
  //  } else {
  //    Serial.println("Error reading current");
  //  }


  if (boucle % 2 == 1) {
    lcd.clear();

    if ( !isnan(pf) ) {
      //Serial.print("PF: "); Serial.println(pf);
      lcd.print(String(pf, 3) + "pf ");
      if (pf != 0) {
        lcd.print(String(power / pf, 0) + "Wa");
      }
    } else {
      //Serial.println("Error reading power factor");
    }

    lcd.setCursor(0, 1);
    if ( !isnan(power) ) {
      //Serial.print("Power: "); Serial.print(power); Serial.println("W");

      if (pf > 0) {
        lcd.print("+" + String(power, 1) + "W ");
      }
      else {
        lcd.print("-" + String(power, 1) + "Wa");
      }

    } else {
      //Serial.println("Error reading power");
    }

    if ( !isnan(energy) ) {
      if (energy < 1000) {
        lcd.print(String(energy * 1000, 0) + "Wh ");
      }
      else {
        lcd.print(String(energy, 1) + "kWh ");
      }
      //    Serial.print("Energy: ");
      //    Serial.print(energy, 3);
      //    Serial.println("kWh");
    } else {
      //Serial.println("Error reading energy");
    }

    //  if ( !isnan(frequency) ) {
    //    Serial.print("Frequency: "); Serial.print(frequency, 1); Serial.println("Hz");
    //  } else {
    //    Serial.println("Error reading frequency");
    //  }

  }
  return power;
}

String getJson(String idx, double value)
{
  String json = "/json.htm?type=command&param=udevice&idx=" + idx + "&svalue=" + String(value) + ";0&nvalue=0&nvalue=0&nvalue=0";
  Serial.println(json);
  return json;
}