136 lines
4.4 KiB
C++
136 lines
4.4 KiB
C++
// vi:ts=4
|
|
// ----------------------------------------------------------------------------
|
|
// Serial2LCD - simple demonstration printing characters from serial port
|
|
// Created by Bill Perry 2020-06-28
|
|
// bperrybap@opensource.billsworld.billandterrie.com
|
|
//
|
|
// This example code is unlicensed and is released into the public domain
|
|
// ----------------------------------------------------------------------------
|
|
//
|
|
// This sketch is for the Noritake CU-U series VFDs, in native serial mode
|
|
//
|
|
// Sketch demonstrates hd44780 how to read a message of characters from
|
|
// serial port and display it on the LCD.
|
|
// It takes advantage of the hd44780 library automatic line
|
|
// wrapping capability.
|
|
// See the LineWrap sketch for details about line wrapping.
|
|
//
|
|
// Configure LCD_COLS, LCD_ROWS and BAUDRATE if desired/needed
|
|
// Expected behavior of the sketch:
|
|
// - characters received from serial port are displayed on LCD
|
|
// - CR and LF are ignored/dropped
|
|
//
|
|
// If initialization of the LCD fails and the arduino supports a built in LED,
|
|
// the sketch will simply blink the built in LED with the initalization error
|
|
// code.
|
|
//
|
|
// Some 16x1 displays are actually a 8x2 display that have both lines on
|
|
// a single line on the display.
|
|
// If you have one of these displays, simply set the geometry to 8x2 instead
|
|
// of 16x1.
|
|
|
|
#include <SPI.h> // optional, include to use h/w spi
|
|
#include <hd44780.h> // main hd44780 header
|
|
#include <hd44780ioClass/hd44780_NTCUUserial.h> // Noritake CU-U serial i/o class header
|
|
|
|
// constructor parameters:
|
|
// lcd([cs], [clock, data])
|
|
// If no parameters, then library will use SS, SCK, and MOSI pins
|
|
// If cs parameter specified, then use it for chip select then SCK and MOSI
|
|
// If <SPI.h> is included and clock & data pins match h/w SPI pins SCK and MOSI,
|
|
// h/w spi will be used
|
|
// If h/w spi is not possible, then the code will fall back to bit banging.
|
|
//
|
|
// NOTE:
|
|
// - Leonardo h/w is "stupid" and does not bring out SS
|
|
// (it only drives an LED)
|
|
// - Leonardo does not bring SPI signals to female headers,
|
|
// they are only on 6 pin ISP header.
|
|
// - ESP8266 is does not use naked constants for digital pin numbers
|
|
//
|
|
//
|
|
// To work around these pin issues in this sketch,
|
|
// Leonardo will use uno digital pins for SPI h/w which means it will
|
|
// not use h/w spi. All the other boards will use the h/w SPI pins.
|
|
// Consult board pinout diagram to see where SS, SCK, and MOSI are available.
|
|
//
|
|
|
|
#if defined(ARDUINO_AVR_LEONARDO) || ( (USB_VID == 0x2341) && (USB_PID == 0x8036) )
|
|
const int cs=10, clk=13, data=11; // uno SPI pins (s/w bit banging will be used)
|
|
#else
|
|
const int cs=SS, clk=SCK, data=MOSI; // use h/w SPI pins on all other boards
|
|
#endif
|
|
hd44780_NTCUUserial lcd(cs, clk, data); // declare lcd object
|
|
|
|
|
|
// LCD geometry
|
|
const int LCD_COLS = 16;
|
|
const int LCD_ROWS = 2;
|
|
|
|
const int BAUDRATE = 9600;
|
|
|
|
void setup()
|
|
{
|
|
int status;
|
|
|
|
// initalize Serial port
|
|
Serial.begin(BAUDRATE);
|
|
|
|
// initialize LCD with number of columns and rows:
|
|
// hd44780 returns a status from begin() that can be used
|
|
// to determine if initalization failed.
|
|
// the actual status codes are defined in <hd44780.h>
|
|
status = lcd.begin(LCD_COLS, LCD_ROWS);
|
|
if(status) // non zero status means it was unsuccesful
|
|
{
|
|
// begin() failed
|
|
|
|
Serial.print("LCD initalization failed: ");
|
|
Serial.println(status);
|
|
|
|
// blink error code using the onboard LED if possible
|
|
hd44780::fatalError(status); // does not return
|
|
}
|
|
|
|
// turn on automatic line wrapping
|
|
// which automatically wraps lines to the next lower line and wraps back
|
|
// to the top when at the bottom line
|
|
// NOTE:
|
|
// noLineWrap() can be used to disable automatic line wrapping.
|
|
// _write() can be called instead of write() to send data bytes
|
|
// to the display bypassing any special character or line wrap processing.
|
|
lcd.lineWrap();
|
|
|
|
lcd.print("Serial2LCD");
|
|
if(LCD_ROWS > 1)
|
|
{
|
|
lcd.setCursor(0,1);
|
|
lcd.print("Baud:");
|
|
lcd.print(BAUDRATE);
|
|
}
|
|
}
|
|
|
|
void loop()
|
|
{
|
|
|
|
// check to see if characters available
|
|
// indicating a message is coming in
|
|
if (Serial.available())
|
|
{
|
|
// wait some time for rest of message to arrive
|
|
delay(100);
|
|
|
|
// Clear the display before showing the new message
|
|
lcd.clear();
|
|
|
|
// print the message on the LCD
|
|
while (Serial.available() > 0)
|
|
{
|
|
char c;
|
|
c = Serial.read();
|
|
if(c != '\r' && c != '\n') // drop CR and LF characters
|
|
lcd.write(c);
|
|
}
|
|
}
|
|
}
|