Arduino/ESP8266_ArduCAM_Capture/ESP8266_ArduCAM_Capture.ino

#include <ESP8266WiFi.h>
#include <WiFiClient.h>
#include <ESP8266WebServer.h>
#include <ESP8266mDNS.h>

#include <Wire.h>
#include <ArduCAM.h>
#include <SPI.h>
#include "memorysaver.h"

// Enabe debug tracing to Serial port.
#define DEBUGGING

// Here we define a maximum framelength to 64 bytes. Default is 256.
#define MAX_FRAME_LENGTH 64

// Define how many callback functions you have. Default is 1.
#define CALLBACK_FUNCTIONS 1

#if defined(ESP8266)
// set GPIO15 as the slave select :
const int CS = 16;
#else
// set pin 10 as the slave select :
const int CS = 10;
#endif

int wifiType = 0; // 0:Station  1:AP
const char* ssid = "Livebox-37cc"; // Put your SSID here
const char* password = "8A6060920A8A86896F770F2C47"; // Put your PASSWORD here
//const char* ssid = "SFR_E4C8"; // Put your SSID here
//const char* password = "Sept/6-Six/4"; // Put your PASSWORD here

ESP8266WebServer server(80);

ArduCAM myCAM(OV2640, CS);

void start_capture(){
  myCAM.clear_fifo_flag();
  myCAM.start_capture();
}

void camCapture(ArduCAM myCAM){
  WiFiClient client = server.client();
  
  size_t len = myCAM.read_fifo_length();
  if (len >= 393216){
    Serial.println("Over size.");
    return;
  }else if (len == 0 ){
    Serial.println("Size is 0.");
    return;
  }
  
  myCAM.CS_LOW();
  myCAM.set_fifo_burst();
  SPI.transfer(0xFF);
  
  if (!client.connected()) return;
  String response = "HTTP/1.1 200 OK\r\n";
  response += "Content-Type: image/jpeg\r\n";
  response += "Content-Length: " + String(len) + "\r\n\r\n";
  server.sendContent(response);
  
  static const size_t bufferSize = 4096;
  static uint8_t buffer[bufferSize] = {0xFF};
  
  while (len) {
      size_t will_copy = (len < bufferSize) ? len : bufferSize;
      SPI.transferBytes(&buffer[0], &buffer[0], will_copy);
      if (!client.connected()) break;
      client.write(&buffer[0], will_copy);
      len -= will_copy;
  }
  
  myCAM.CS_HIGH();
}

void serverCapture(){
  start_capture();
  Serial.println("CAM Capturing");

  int total_time = 0;

  total_time = millis();
  while (!myCAM.get_bit(ARDUCHIP_TRIG, CAP_DONE_MASK));
  total_time = millis() - total_time;
  Serial.print("capture total_time used (in miliseconds):");
  Serial.println(total_time, DEC);
  
  total_time = 0;
  
  Serial.println("CAM Capture Done!");
  total_time = millis();
  camCapture(myCAM);
  total_time = millis() - total_time;
  Serial.print("send total_time used (in miliseconds):");
  Serial.println(total_time, DEC);
  Serial.println("CAM send Done!");
}

void serverStream(){
  WiFiClient client = server.client();
  
  String response = "HTTP/1.1 200 OK\r\n";
  response += "Content-Type: multipart/x-mixed-replace; boundary=frame\r\n\r\n";
  server.sendContent(response);
  
  while (1){
    start_capture();
    
    while (!myCAM.get_bit(ARDUCHIP_TRIG, CAP_DONE_MASK));
    
    size_t len = myCAM.read_fifo_length();
    if (len >= 393216){
      Serial.println("Over size.");
      continue;
    }else if (len == 0 ){
      Serial.println("Size is 0.");
      continue;
    }
    
    myCAM.CS_LOW();
    myCAM.set_fifo_burst();
    SPI.transfer(0xFF);
    
    if (!client.connected()) break;
    response = "--frame\r\n";
    response += "Content-Type: image/jpeg\r\n\r\n";
    server.sendContent(response);
    
    static const size_t bufferSize = 4096;
    static uint8_t buffer[bufferSize] = {0xFF};
    
    while (len) {
      size_t will_copy = (len < bufferSize) ? len : bufferSize;
      SPI.transferBytes(&buffer[0], &buffer[0], will_copy);
      if (!client.connected()) break;
      client.write(&buffer[0], will_copy);
      len -= will_copy;
    }
    myCAM.CS_HIGH();
    
    if (!client.connected()) break;
  }
}

void handleNotFound(){
  String message = "Server is running!\n\n";
  message += "URI: ";
  message += server.uri();
  message += "\nMethod: ";
  message += (server.method() == HTTP_GET)?"GET":"POST";
  message += "\nArguments: ";
  message += server.args();
  message += "\n";
  server.send(200, "text/plain", message);
  
  if (server.hasArg("ql")){
    int ql = server.arg("ql").toInt();
    myCAM.OV2640_set_JPEG_size(ql);
    Serial.println("QL change to: " + server.arg("ql"));
  }
}

void setup() {
  uint8_t vid, pid;
  uint8_t temp;
#if defined(__SAM3X8E__)
  Wire1.begin();
#else
  Wire.begin();
#endif
  Serial.begin(115200);
  Serial.println("ArduCAM Start!");

  // set the CS as an output:
  pinMode(CS, OUTPUT);

  // initialize SPI:
  SPI.begin();
  SPI.setFrequency(4000000); //4MHz

  //Check if the ArduCAM SPI bus is OK
  myCAM.write_reg(ARDUCHIP_TEST1, 0x55);
  temp = myCAM.read_reg(ARDUCHIP_TEST1);
  if (temp != 0x55){
    Serial.println("SPI1 interface Error!");
    while(1);
  }

  //Check if the camera module type is OV2640
  while(1){
    //Check if the camera module type is OV2640
    myCAM.wrSensorReg8_8(0xff, 0x01);
    myCAM.rdSensorReg8_8(OV2640_CHIPID_HIGH, &vid);
    myCAM.rdSensorReg8_8(OV2640_CHIPID_LOW, &pid);
    if ((vid != 0x26 ) && (( pid != 0x41 ) || ( pid != 0x42 ))){
      Serial.println(F("Can't find OV2640 module!"));
      delay(1000);continue;
    }
    else{
      Serial.println(F("OV2640 detected."));
      break;
    }
  }

  //Change to JPEG capture mode and initialize the OV2640 module
  myCAM.set_format(JPEG);
  myCAM.InitCAM();
  myCAM.OV2640_set_JPEG_size(OV2640_1024x768); //OV2640_1600x1200); //OV2640_1024x768); //OV2640_640x480);
  myCAM.clear_fifo_flag();
  //myCAM.write_reg(ARDUCHIP_FRAMES, 0x00);

  if (wifiType == 0){
    // Connect to WiFi network
    Serial.println();
    Serial.println();
    Serial.print("Connecting to ");
    Serial.println(ssid);
    
    WiFi.mode(WIFI_STA);
    WiFi.begin(ssid, password);
    while (WiFi.status() != WL_CONNECTED) {
      delay(500);
      Serial.print(".");
    }
    Serial.println("WiFi connected");
    Serial.println("");
    Serial.println(WiFi.localIP());
  }else if (wifiType == 1){
    Serial.println();
    Serial.println();
    Serial.print("Share AP: ");
    Serial.println(ssid);
    
    WiFi.mode(WIFI_AP);
    WiFi.softAP(ssid, password);
    Serial.println("");
    Serial.println(WiFi.softAPIP());
  }
  
  // Start the server
  server.on("/capture", HTTP_GET, serverCapture);
  server.on("/stream", HTTP_GET, serverStream);
  server.onNotFound(handleNotFound);
  server.begin();
  Serial.println("Server started use /capture or /stream");
}

void loop() {
  server.handleClient();
}